Remove SIM-lock patch generator

[infogsm]

is the SE K320 CID50 supported for patch unlock with this free tool and setool2lite ? i already found this vkp file that correspond to my phone FW : K320_R4GC012_RED50.vkp

br

[m.warner]

o0ops - I did post a link to where I got my R8BA024 firmware from, but it was deleted by justme and I was given a warning! The bottom line is I can't tell you, but I managed to find the firmware after around 5-10 mins of trying, so I would imagine you can do the same.

[norberto_]

Wow and the updated 2.1 ver is ready to download on simox's site!!! Thanks Simox!

It supports more sw versions. :D

[simox]

It's right norberto_. Guys you can download from first post of this thread too. Hope that now it supports almost all firmwares.

[khli2001]

after i get the patch
do i need to flash the main and the patch together or just need to flash the patch

[jasmin]

You need only to apply the patch.

How to apply patch

How to remove or add the patch with setool 2 Lite:

- Select your phone model
- click Use "quick access" patch tick box
- add the same Patch to MISC File
- Click Write Script
- Hold C and insert Cable
- Click "Yes" to remove the patch. Click "No" to add the patch.



Nice day

[khli2001]

i have some problem when i press C and insert Cable
my phone turns on

it wont happen when i use XS++ or FAR

[Th3z3D]

Hi! first all... Nice job man

but I have a problem, and a doubt.

The problem: When I tried use your aplication, with my firmware files, was an error, here is the log:

S.E z710i

Selected firmware: C:\Documents and Settings\Th3z3D\Escritorio\SE 2008\z710\Z710
_R1EF001_MAIN_GENERIC_RED49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Th3z3D\Escritorio\SE 
2008\z710\Z710_R1EF001_MAIN_GENERIC_RED49.mbn" firmware is probably corrupted!
FINISHED.

S.E w710i

Selected firmware: C:\Documents and Settings\Th3z3D\Escritorio\SE 2008\W710i\W710
_R1JC002_Main Generic y FS\W710_R1JC002_MAIN_GENERIC_RED49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Th3z3D\Escritorio
\SE 2008\W710i\W710_R1JC002_Main Generic y FS\W710_R1JC002
_MAIN_GENERIC_RED49.mbn" firmware is probably corrupted!
FINISHED.

Selected firmware: C:\Documents and Settings\Th3z3D\Escritorio\SE 2008\W710i\W710
_R1EE001\W710_R1EE001_MAIN_GENERIC_RED49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Th3z3D\Escritorio
\SE 2008\W710i\W710_R1EE001\W710_R1EE001_MAIN_GENERIC_RED49.mbn" firmware is 
probably corrupted!
FINISHED.

I have a z710i converted to w710i with the R1JC002 firmware. So, can you help me with this problem? it's a bug of you app??

Also, my doubt is what's the problem or restrictions if I convert my phone CID 49 to CID 52??

Greetings

[norberto_]

Hi! first all... Nice job man

but I have a problem, and a doubt.

The problem: When I tried use your aplication, with my firmware files, was an error, here is the log:

S.E z710i

Selected firmware: C:\Documents and Settings\Th3z3D\Escritorio\SE 2008\z710\Z710
_R1EF001_MAIN_GENERIC_RED49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Th3z3D\Escritorio\SE 
2008\z710\Z710_R1EF001_MAIN_GENERIC_RED49.mbn" firmware is probably corrupted!
FINISHED.

S.E w710i

Selected firmware: C:\Documents and Settings\Th3z3D\Escritorio\SE 2008\W710i\W710
_R1JC002_Main Generic y FS\W710_R1JC002_MAIN_GENERIC_RED49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Th3z3D\Escritorio
\SE 2008\W710i\W710_R1JC002_Main Generic y FS\W710_R1JC002
_MAIN_GENERIC_RED49.mbn" firmware is probably corrupted!
FINISHED.

Selected firmware: C:\Documents and Settings\Th3z3D\Escritorio\SE 2008\W710i\W710
_R1EE001\W710_R1EE001_MAIN_GENERIC_RED49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Th3z3D\Escritorio
\SE 2008\W710i\W710_R1EE001\W710_R1EE001_MAIN_GENERIC_RED49.mbn" firmware is 
probably corrupted!
FINISHED.

I have a z710i converted to w710i with the R1JC002 firmware. So, can you help me with this problem? it's a bug of you app??

Also, my doubt is what's the problem or restrictions if I convert my phone CID 49 to CID 52??

Greetings

The problem is that your MAIN FW is CID49. The patch maker can generate an unlock patch for a CID52 FW!!
You have to upgrade the phone to CID52. And use a CID52 flashfile!

WBR. Norberto_

[rtmsz25]

Ive just tried this and I think it didn`t work...here is my log.

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3522080127xxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Enable alternative security bypass !!!
Starting to process VKP patch script: C:\Documents and Settings\User\Desktop\SIMLockPatchGen\vkp\Remove_S IM_lock_K790_R6BC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:52 secs.

Any Help?

Thanks!