Remove SIM-lock patch generator

[DK_]

Mine comes out as

Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required adresses...
Internal error: jump address cannot be found! Please contact the author.
FINISHED.

Firmware:
k810_R1KG001_MAIN_CHINA_RED52.mbn

2nd try using k800 firmware :

Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required adresses...
Entry point cannot be found. Probably it is not a MAIN firmware, but if you are sure that it is, then please contact the author.
FINISHED.

Firmware:
K800_R1JG001_MAIN_HONG_KONG_WI_RED52.mbn

3rd try using k810 Firmware:

Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required adresses...
Addresses found.
Generating vkp patch...
"D:\SE Mods\SIMLockPatchGen\vkp\Remove_SIM_lock_K810_R8BA 024.vkp" patch file created.
FINISHED.

Firmware
K810_R8BA024_MAIN_TAIWAN_SM_RED52.mbn
It made the patched, cant apply it to phone

------------------------------------------------

Thats it for now, i will try R8.. when i get the firmware

[ts013]

It has been pointed out several times that only R8x firmwares (and probably R7x) are working for now.
Please stop posting about problems with other firmwares and wait for the final release!

[manjak]

Hello everyone.
I flashed my k550i to R8BA024, created unlock patch, and applied it to my phone with setool lite. I got an error "some patch values differs..." continue? I clicked yes. Here's my log:

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Maciej\Desktop\SIMLockPatchGen\vkp\Remove_SIM_lock_K550_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:630 secs.

And my phone was dead. I reflashed it again, tried to patch it once again and it ended again with a dead phone.

Anyone can help?

[SoulFeeder]

Hello everyone.
I flashed my k550i to R8BA024, created unlock patch, and applied it to my phone with setool lite. I got an error "some patch values differs..." continue? I clicked yes. Here's my log:

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Maciej\Desktop\SIMLockPatchGen\vkp\Remove_SIM_lock_K550_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:630 secs.

And my phone was dead. I reflashed it again, tried to patch it once again and it ended again with a dead phone.

Anyone can help?

I am having the exact same problem. The only thing that's different is that the phone I'm trying to unlock is a W300i and I'm using W300i_R9A036_MAIN_GENERIC_JE_RED49.mbn
W300i_R9A036_FS_ CENT_EUROPE_RED49.fbn

this is the script of the patch I got from the generator

;W300 SW-_R9A036
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
C94220: 70B5041CF0F21EF800230022011C1C20 F0B505213A22D1F72FFD0020F0BDC046

when I check the simlock from the service menu i only show the network locked and the rest are unlock and that's the only one that I can't get

Please help me :)

[startimes]

try to remove u re patch with setool2lite and reflash it

[manjak]

try to remove u re patch with setool2lite and reflash it

Hehe, thanks but I already did that twice and my phone works now, so that's not my problem :) I was just wondering if anyone knew why did that happen. Anyone knows what this error "some patch values differs" is caused by? Am I doing something wrong? When I'm flashing my phone should I put firmware file to 'firmware upgrade pack' and patch to 'MISC files' or just the patch without firmware (like I did)?

[simox]

"some patch values differs" means that the vkp patch isn't for the phone's firmware or there is already patched with the same or older version of patch, or there is a conflict between patches or the patch is bad. I think that the generated patch is good, but I will check it anyway...
Check out this thread: How to apply patches with SETool2 Lite V1.11.

[manjak]

My firmware is totally clean. I didn't install any other patches. I had R6BC002 firmware but I flashed it to R8BA024 and created a patch with Your program from the same file so how can it be? I followed the instructions from here:

http://www.topsony.com/forum/showthread.php?t=6957

Thank you very much for trying to help :)

[simox]

My firmware is totally clean. I didn't install any other patches. I had R6BC002 firmware but I flashed it to R8BA024 and created a patch with Your program from the same file so how can it be? I followed the instructions from here:

http://www.topsony.com/forum/showthread.php?t=6957

Thank you very much for trying to help :)

Then probably my tool generates bad patch. Like I said, I will check that patch, and I will fix my tool, but I need some time...

m.warner: I will release a new version soon, that hopefully will support all DB2020 firmwares. But If you don't want to wait(about 1 day), then my answer for your question is: yes.

[o0ops]

OK, seems the outmost recent version is R8BA024 CID 52, mine is R1CE001 CID51, I CAN upgrade it to CID52 with XS++, but where can I get the firmware and FS files? Thanks.