Remove SIM-lock patch generator

[anneann]

This software must be doing a good job unlocking. I unlock my mobile at www.unlock-free.com using codes. Is it safe to unlock using software.

[olle00]

Can someone help me please?
I don't understand this guide. I need to unlock my w800i.
What files should I download?


My w800i:
R1BC002
RED
CID: 36
EUROPE_4


I have downloaded remove "SIM-lock patch generator v.2.2" and "SEtool2 Lite 1.11".
Think I have successfully installed "USB Flash driver". I just installed the latest "Update Service program" for w800i at Sony Ericsson homepage. The device manage doesn't show any drivers needed for "USB Flash driver".

[frc1]

Does this tool working with W200i (DB2010, CID52) ?

[mordax]

dude sry, but this is COMPLETE CRAP. you have left out the most important details. for example WHERE THE FUCK DO I GET THE FUCKING FIRMWARE IN THE FIRST PLACE ??????????????????

i dont want to flash or put new firmware on my phone, its unbranded and only simlocked, i want to UNLOCK IT not unbrand and unlock.
you are making NO SENSE. and like "connect your phone" HOWWWWWWWWW ??? explain. on W880i C button turns phone on/off, so it doesnt freaking work. you need 2 button or 2+5. its confusing !

if you make tutorial, make it TUTORIAL not a step 1 > loads missing > step 2 > loads missing > step 3 > missing, missing missing > step 4.

this does not freaking work.
//////////////////////////////////////////

yes im angry sry, but take it with your brain.
1. make a backup of GDFS (i have ORIGINAL unbranded firmware)
2. drag firmware into blabla tool.

what is the point ?? it means that i have to downoad NEW firmware, which means that if i fuck something up, that backup is useless. makes no sense to me. i dont even know where to get my phone's firmware, the same i have.

first step should be DOWNLOAD FIRMWARE, flash it and THEN make backup. or what am i missing ?

it just pisses me off when ppl write nonsense without proper testing.

[awplicious]

dude sry, but this is COMPLETE CRAP. you have left out the most important details. for example WHERE THE FUCK DO I GET THE FUCKING FIRMWARE IN THE FIRST PLACE ??????????????????

i dont want to flash or put new firmware on my phone, its unbranded and only simlocked, i want to UNLOCK IT not unbrand and unlock.
you are making NO SENSE. and like "connect your phone" HOWWWWWWWWW ??? explain. on W880i C button turns phone on/off, so it doesnt freaking work. you need 2 button or 2+5. its confusing !

if you make tutorial, make it TUTORIAL not a step 1 > loads missing > step 2 > loads missing > step 3 > missing, missing missing > step 4.

this does not freaking work.
//////////////////////////////////////////

yes im angry sry, but take it with your brain.
1. make a backup of GDFS (i have ORIGINAL unbranded firmware)
2. drag firmware into blabla tool.

what is the point ?? it means that i have to downoad NEW firmware, which means that if i fuck something up, that backup is useless. makes no sense to me. i dont even know where to get my phone's firmware, the same i have.

first step should be DOWNLOAD FIRMWARE, flash it and THEN make backup. or what am i missing ?

it just pisses me off when ppl write nonsense without proper testing.

I think you should get a brain. 1st of all it's quite detailed, 2nd of all u'r not forced to use it, u can go to a service. 3rd u can find what firmware u got on your phone, by connecting it to setool2lite and click on identify. 4th the gdfs backup will help u if u do something wrong(cuz it's a backup). You don't have to fuck something up. Ask for help, don't judge.

[riders4sia]

dude sry, but this is COMPLETE CRAP. you have left out the most important details. for example WHERE THE FUCK DO I GET THE FUCKING FIRMWARE IN THE FIRST PLACE ??????????????????

i dont want to flash or put new firmware on my phone, its unbranded and only simlocked, i want to UNLOCK IT not unbrand and unlock.
you are making NO SENSE. and like "connect your phone" HOWWWWWWWWW ??? explain. on W880i C button turns phone on/off, so it doesnt freaking work. you need 2 button or 2+5. its confusing !

if you make tutorial, make it TUTORIAL not a step 1 > loads missing > step 2 > loads missing > step 3 > missing, missing missing > step 4.

this does not freaking work.
//////////////////////////////////////////

yes im angry sry, but take it with your brain.
1. make a backup of GDFS (i have ORIGINAL unbranded firmware)
2. drag firmware into blabla tool.

what is the point ?? it means that i have to downoad NEW firmware, which means that if i fuck something up, that backup is useless. makes no sense to me. i dont even know where to get my phone's firmware, the same i have.

first step should be DOWNLOAD FIRMWARE, flash it and THEN make backup. or what am i missing ?

it just pisses me off when ppl write nonsense without proper testing.

well, that's guided from specific phone and most similar, do you think all se phones are the same?
why don't you just read the detailed tutorial before you bla bla bla?

[Loz]

Does the simlock lock support unlocking W810i Cid 50?

[eukristian]

Hi! Thanks for this great tool, but apparently it doesn't work for me (K310i EROM CID49 RED) .

I've just flashed it with K310_R4EA031_MAIN_GENERIC_DO_RED49 a few hours ago and I used this fw to generate . I tried both version 2.1 and 2.2 .

This is the first log :

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35155901531635 CERT:RED
FLASH CID:49 COLOR:RED
 
Model:K310i
Brand:Sony Ericsson
MAPP CXC article: R4EA031     prgCXC1250466_GENERIC_DO
MAPP CXC version: R4EA031
Language Package:CENT_EUROPE
CDA article: CDA102570/67
CDA version: R7A
Default article: cxc1250474
Default version: R4EA031
 
Network LOCKED
Operator: 226-01
 
USERCODE:0000
 
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
 
Elapsed:5 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35155901531635 CERT:RED
FLASH CID:49 COLOR:RED
 
Model:K310i
Brand:Sony Ericsson
MAPP CXC article: R4EA031     prgCXC1250466_GENERIC_DO
MAPP CXC version: R4EA031
Language Package:CENT_EUROPE
CDA article: CDA102570/67
CDA version: R7A
Default article: cxc1250474
Default version: R4EA031
 
Network LOCKED
Operator: 226-01
 
USERCODE:0000
 
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
 
Elapsed:5 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35155901531635 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250466_GENERIC_DO
Restore from:R4EA031_CXC1250466_GENERIC_DO
Starting to process VKP patch script: C:\Users\eukristian\Desktop\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\Remove_SIM_lock_K310_R4EA031.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44C80000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:60 secs.

The second log (trying v2.2) :

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35155901531635 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250466_GENERIC_DO
Restore from:R4EA031_CXC1250466_GENERIC_DO
Starting to process VKP patch script: C:\Users\eukristian\Desktop\Remove_SIM_lock_K310_R4EA031_GENERIC.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44C80000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
block already patched, skipping.
VKP script executed OK
Elapsed:66 secs.

So no errors were reported . However, in the service menu, it shows it is locked in all 5 sections , and also on later Identify logs.
Thank you for you help .

[vladpuf]

Worked perfect for me to generate the .vpk file for K800i red CID53.

[hopa]

hello people

Does the Patch work with A2 phones (c702).
If it does ,can someone write link or procedure.