Remove SIM-lock patch generator

[wookie1965]

after doing everything you said my w580i is not unlocked although cant find quick access patch checkbox and this is what im getting when i run the script any help would be very much appreciated Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35651402830088 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\paul\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W880_R8BE001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:14 secs.

[riders4sia]

after doing everything you said my w580i is not unlocked although cant find quick access patch checkbox and this is what im getting when i run the script any help would be very much appreciated Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35651402830088 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\paul\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W880_R8BE001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:14 secs.

use setool2lite v1.11 and apply qucik access first. your problem is with the quick access, you have not apply it yet. download setool v1.11 and you'll find "Bypass DB2020 Security", tick this and on the Add button, select the MAIN file and on the misc... select the quick access patch and click on the flash button, do whatever setool said. after the procedure is successfull, now select Use "quick access" patch and on the misc... select the vkp file (patch) you want to apply and click on the "Write Script"

[sosick]

hello .. i recently unlocked my se v630 and i have a small problem.
my phone was DB20202 CID49 and i upgraded it to DB2020 CID52 so i could apply the sim unlock patch.
so i have the following problems:

-when i lock my phone and leave it for some time it won't unlock as fast as it did in the past.. it seems that i need to push the unlock key a few times (4-5 times) before it responds

-my display brightness is at the lowest level (like the times it's idle, before the display turns off or after you lock it ). when i change it from the display settings it works fine until the phone stay idle again

some help please?

[shojiro]

Hi since the new version simlockpatchgen 2.2 now supports CID53 can I just follow the steps for CID52 to unlock my phone?

[slazhburn]

Pardon my ignorance if my question has already been posted on this thread: I currently don't have the time to read 138 pages of this thread.

My question: Can this guide be used for a sim-locked SE P990i from the Philippines.

[god9]

Great, thank alot! I has done it

[cib]

Hi.

I am trying to remove the sim-lock of my W580i (db2020 CID52), but when I run the setool V1.11, it shows that it doesn't find the setool2lib_lt.dll module. This file is in the same folder than setool2lt.exe file.

Could you help me with this?
Best regards,

CIB.

[riders4sia]

redownload and try again, probably a corrput file

[Homem]

Hi, i'm trying to unlock my s500i db2020 cid52, i've debrand it with xs++, made the sim-lock patch but when i hit "write script" on se tool, (with the phone turned off) it tells me to hold c and plug usb cable, then the phone goes to file transfer mode and the script doesn't run, just aborts after a few seconds. what am i doing wrong?

edit: if i uncheck the "use quick access patch" it runs the script, dialog box appears (remove/apply patch) but the phone remains unlock. This is what i get:


Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501307715 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\SIMLockPatchGen\vkp\Remove_SIM_lock_S500_R8BE00 1.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:15 secs.

[Homem]

oops! never mind, forgot to apply the quick acess path first, my bad! the script runnned, my phone is unlocked now :D