Remove SIM-lock patch generator

[simox]

Sorry for late reply, but my internet connection is lagging badly.
I'm working on solution already, but these guys at SE make things hard. I have some ideas but need some time... And guys please test the generated patches. Don't worry, my patch will not kill your phone. If the generated patch doens't works just remove it and problem solved.

[610]

;w610-R6BC002
;Clear SP-Lock
;Remove SP-Lock
;(c) IronMaster
;(p) sunfire7
+44140000
4ee75c: 30B5041C00231A1C111C1C2094F4 F0B505213A229BF44DFD0020F0BD

SW-R6xxxxx - work

[interferej]

working by k550i/w610 with R8 apply by setool. Tkanks for simox I m really happy

[ts014]

hope your programme can support all db2020 phones soon, theres loads of unlock patches about now to look at.

[DK_]

Mine comes out as

Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required adresses...
Internal error: jump address cannot be found! Please contact the author.
FINISHED.

Firmware:
k810_R1KG001_MAIN_CHINA_RED52.mbn

2nd try using k800 firmware :

Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required adresses...
Entry point cannot be found. Probably it is not a MAIN firmware, but if you are sure that it is, then please contact the author.
FINISHED.

Firmware:
K800_R1JG001_MAIN_HONG_KONG_WI_RED52.mbn

3rd try using k810 Firmware:

Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required adresses...
Addresses found.
Generating vkp patch...
"D:\SE Mods\SIMLockPatchGen\vkp\Remove_SIM_lock_K810_R8BA 024.vkp" patch file created.
FINISHED.

Firmware
K810_R8BA024_MAIN_TAIWAN_SM_RED52.mbn
It made the patched, cant apply it to phone

------------------------------------------------

Thats it for now, i will try R8.. when i get the firmware

[ts013]

It has been pointed out several times that only R8x firmwares (and probably R7x) are working for now.
Please stop posting about problems with other firmwares and wait for the final release!

[manjak]

Hello everyone.
I flashed my k550i to R8BA024, created unlock patch, and applied it to my phone with setool lite. I got an error "some patch values differs..." continue? I clicked yes. Here's my log:

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Maciej\Desktop\SIMLockPatchGen\vkp\Remove_SIM_lock_K550_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:630 secs.

And my phone was dead. I reflashed it again, tried to patch it once again and it ended again with a dead phone.

Anyone can help?

[startimes]

try to remove u re patch with setool2lite and reflash it

[manjak]

try to remove u re patch with setool2lite and reflash it

Hehe, thanks but I already did that twice and my phone works now, so that's not my problem :) I was just wondering if anyone knew why did that happen. Anyone knows what this error "some patch values differs" is caused by? Am I doing something wrong? When I'm flashing my phone should I put firmware file to 'firmware upgrade pack' and patch to 'MISC files' or just the patch without firmware (like I did)?

[simox]

"some patch values differs" means that the vkp patch isn't for the phone's firmware or there is already patched with the same or older version of patch, or there is a conflict between patches or the patch is bad. I think that the generated patch is good, but I will check it anyway...
Check out this thread: How to apply patches with SETool2 Lite V1.11.