W810i dead after flash

[Coramoor]

Ok, I will try and reflash it with 3.1 :). Hopefully that will do the trick. I got a hold of a service cable as well, will use that instead.

OK this is not going to well. Using XS++ 3.1 with both USB DC-60 cable and a 2in1 cruiser cable and neither seem to be able to access the phone. The DC-60 cable only produces the response " "Did not receive 0x5a. Continuing.." while the cruiser cable won't even go that far. Any ideas?

Ok after some more trying I got it to connect to the phone with the 2in1 cable and the phone is red and not brown. Trying to re-flash the main and all now.

23:26:33| Attempting to open the interface...
23:26:33| Baseband ID: 8040
23:26:33| Protocol Version: 3.1
23:26:34| Speed set to 115200
23:26:34| Sending db2010_cid00_prodid_p3l.bin...
23:26:38| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
23:26:38| This is a PRODUCTION_ID loader
23:26:38| Activating GDFS...
23:26:39| Phone name detected!
23:26:39| Restarting phone - please wait...
23:26:45| Baseband ID: 8040
23:26:45| Protocol Version: 3.1
23:26:46| Speed set to 115200
23:26:46| Phone has restarted successfully...
23:26:46| Profiling SEMC phone...
23:26:46| Platform: DB2010
23:26:46| OTP CID: 49
23:26:46| EROM CID: 49
23:26:46| EROM Color: Red
23:26:46| IMEI: 35233601xxxxxx
23:26:46| Phone ID: W810
23:26:46| Region: EUROPE_2
23:26:46| CDA: CDA102494/2 R4A
23:26:46| Firmware Version: R4ED001
23:26:46| EROM: n/a
23:26:46| Ready for operation!
23:27:48| After making any changes with FSX
23:27:48| you must press the 'Shutdown' button