Results 1 to 8 of 8

Thread: Invisible k750

Hybrid View

  1. #1
    Recently Initiate
    Join Date
    Sep 2007
    Device
    -
    Posts
    4
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Invisible k750

    Please can anyone help k750 db2010 cid49 flashing led on startup all usual symptoms of needing eprom upgrade but am unable to connect to dcu60 cable only usb service cable and then I get this:

    welcome to setool2 lite edition v 1.08
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301
    PHONE IS INVISIBLE (00000000)
    NO VALID FLASH CID DETECTED (00)
    skipping empty loader...
    Can't load id loader !
    Elapsed:11 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301
    PHONE IS INVISIBLE (00000000)
    NO VALID FLASH CID DETECTED (00)
    skipping empty loader...
    phone pre-boot failed,possible RECOVERY needed.
    Elapsed:11 secs.

    Have tried it seems all alternative routes open setool cracked (dont tel lasyk)

    I know the otp is intact because I can get the imei even cid version with setool but will not load empty bootloader. Any help much appreciated.

  2. #2
    Banned
    Join Date
    Jul 2007
    Device
    -
    Posts
    709
    Thanks
    25
    Thanked 278 Times in 100 Posts
    If it's CID49 you can try with testpoint. If that doesn't work your flash chip is dead.

  3. #3
    Banned
    Join Date
    May 2007
    Device
    -
    Posts
    46
    Thanks
    4
    Thanked 6 Times in 5 Posts
    same for me how can i do testpoint

  4. #4
    Recently Initiate Macak's Avatar
    Join Date
    Dec 2007
    Device
    K750i
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Yo can revive it with GOT tool or something else (UFS, Semc, SEMCtool8.4...but with setool2 lite edition v 1.08 dont try. For GOT you dont need TP like for many other tools.
    What other tools for SE you have? Maybe some box?

  5. #5
    Recently Initiate
    Join Date
    Sep 2007
    Device
    -
    Posts
    4
    Thanks
    2
    Thanked 0 Times in 0 Posts
    I have tms server cable. Some davinci credits, some kk credits. Did have access to multibox but that has gone back for repair (worst thing I have ever bought). The test point route seems the most obvious choice but there is so little reliable information on how to do this. I read at least three different ways it should be done on different forums. earthing out components sounds a little bit risky unless you got a reliable source dont you think?

  6. #6
    Banned
    Join Date
    Jul 2007
    Device
    -
    Posts
    709
    Thanks
    25
    Thanked 278 Times in 100 Posts
    The way I did it: connect the negative of your battery to the testpoint.
    It's not an easy job, you've got to disassemble the phone and the testpoint is very small.

    You can use SE Tool cracked for the job.

  7. #7
    Member Emiliano85's Avatar
    Join Date
    Aug 2007
    Device
    W910i, k810i
    Posts
    21
    Thanks
    7
    Thanked 1 Time in 1 Post
    i used Sonics_SE_Tools_Ver_1.120 and with recover phone and it worked :D

  8. #8
    Advanced user jagadeesh's Avatar
    Join Date
    Sep 2007
    Device
    K750i
    Posts
    159
    Thanks
    54
    Thanked 1 Time in 1 Post
    what cable did u use to bring back the life of your phone ?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •