Dead 580i? Please help....

[Spartan123]

I would but XS++ Doesn't let me do anything when I connect using 2 & 5. and my phone does not want to connect with C button.

[ts014]

I would but XS++ Doesn't let me do anything when I connect using 2 & 5. and my phone does not want to connect with C button.

ur erom is damaged, connect to setool2 lite holding down 2+5 and press the unlock/repair button

[marn]

oh if you want use seus it dont work because if your gdfs damage your phone dont recognize
must use from box to repair gdfs by topic (repair gdfs) i sure your phone become true but this topic delete
you must use gdfs repair in setool2

[Spartan123]

ur erom is damaged, connect to setool2 lite holding down 2+5 and press the unlock/repair button

Already tried and this is what I get:

Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:7 secs.


Any other suggestions? Please...I really want to revive my phone

[ts014]

if wotan, xs++ and setool 2 lite have failed with the dcu-60 cable, you will need a service cable to fix your phone.

[Spartan123]

if wotan, xs++ and setool 2 lite have failed with the dcu-60 cable, you will need a service cable to fix your phone.

Are you sure there isn't any other way? And which cable should I buy and where can I get it cheap? Thanks!

[beto_nl]

A couple of months ago, when I killed my phone, doing i dont know what any more(newbie), I started SEtool2 lite, selected my phone model and hit "FLASH" :

-I didn't add any (rest)file before pressing flash, SEtool detects and uses the rest file by itself ( at least in my case) otherwise you should look for the right rest file.
- It worked on my W800 cid49 red (K750) all patched, I hope it will work for you!!!

so that's what I did then:

1) Open SEtool2 lite
2) Choose your phone model
3) Then press "FLASH" button (without adding any files in any windows), follow instructions, disconnect and..voilá! phone is revived

It worked for me so tell me if it worked for you too!!

Are you sure there isn't any other way? And which cable should I buy and where can I get it cheap? Thanks!

[Spartan123]

A couple of months ago, when I killed my phone, doing i dont know what any more(newbie), I started SEtool2 lite, selected my phone model and hit "FLASH" :

-I didn't add any (rest)file before pressing flash, SEtool detects and uses the rest file by itself ( at least in my case) otherwise you should look for the right rest file.
- It worked on my W800 cid49 red (K750) all patched, I hope it will work for you!!!

so that's what I did then:

1) Open SEtool2 lite
2) Choose your phone model
3) Then press "FLASH" button (without adding any files in any windows), follow instructions, disconnect and..voilá! phone is revived

It worked for me so tell me if it worked for you too!!

Thanks but sadly it didn't work out for me. Where can I find REST files?