I need your help !!!

[PSS]

HI !!!!

when i start flashing my phone XS++ say this :

11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| PHONE INFO
11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| DBID: db2010
11:29:55| OTP CID: 36
11:29:55| EROM CID: 36
11:29:55| EROM color: Brown
11:29:55| IMEI: 35655200xxxxxx
11:29:55| Phone: K750
11:29:55| Operator: EMEA_2
11:29:55| CDA: CDA102337/2 R6A
11:29:55| Firmware: R1N035
11:29:55| EROM: n/a
11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| Ready for operation!
11:30:49| Sending loaders\db2010_cid00_prodid_r2f.bin...
11:30:49| This is a PRODUCTION_ID loader
11:30:49| Sending loaders\db2010_cid00_cert_r2e.bin...
11:30:49| This is a CERTIFICATE loader
11:30:49| Breaking in...
11:30:49| Waiting for breakin hello...
11:30:49| Sending loaders\db2010_cid36red_flash_r2ab.bin...
11:30:50| This is a FLASH loader
11:30:50| +++ Now flashing filesystem...
11:30:50| Sending flashfile E:\PN´D\11\W800_R1BC002_FS_EMEA2.bin
11:30:50| 157 flashblocks
11:30:50| Binary acknowledge failed with: 15
11:30:50| Failed
11:31:10| ++ Error: Flashing failed
11:31:10| Disconnected... Unplug the phone


what cant i do with this ?

is the same answer if i flash to any version of firmware ....

[adigangsta]

i had the same problem with my w810i, but the problem may be from your DCU-60 cable...try not to move your phone during flashing...hope this helps you a little

[csky888]

try removing your battery for 10 seconds and connect it again

[kentmoberg]

K750 support is buged in Phone XS and Phone xc. Try to use Speed_unlock, but not with DCU-60.

[luzer]

@PSS your phone is a CID36, try with Gflash

[sk_quest]

HI !!!!

when i start flashing my phone XS++ say this :

11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| PHONE INFO
11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| DBID: db2010
11:29:55| OTP CID: 36
11:29:55| EROM CID: 36
11:29:55| EROM color: Brown
11:29:55| IMEI: 35655200xxxxxx
11:29:55| Phone: K750
11:29:55| Operator: EMEA_2
11:29:55| CDA: CDA102337/2 R6A
11:29:55| Firmware: R1N035
11:29:55| EROM: n/a
11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| Ready for operation!
11:30:49| Sending loaders\db2010_cid00_prodid_r2f.bin...
11:30:49| This is a PRODUCTION_ID loader
11:30:49| Sending loaders\db2010_cid00_cert_r2e.bin...
11:30:49| This is a CERTIFICATE loader
11:30:49| Breaking in...
11:30:49| Waiting for breakin hello...
11:30:49| Sending loaders\db2010_cid36red_flash_r2ab.bin...
11:30:50| This is a FLASH loader
11:30:50| +++ Now flashing filesystem...
11:30:50| Sending flashfile E:\PN´D\11\W800_R1BC002_FS_EMEA2.bin
11:30:50| 157 flashblocks
11:30:50| Binary acknowledge failed with: 15
11:30:50| Failed
11:31:10| ++ Error: Flashing failed
11:31:10| Disconnected... Unplug the phone


what cant i do with this ?

is the same answer if i flash to any version of firmware ....

Hi

from the log it can easily be seen that EROM color is brown and you are trying to flash it with XS++. To flash your phone, first convert EROM color from Brown to Red and then use XS++. You can search this forum to get information about conversion of Brown to Red.

[[WeR]]

If you have XS ver 1.0 then it is bag os this ver. Download XS ver 1.0

[wisky_2004]

HI !!!!

when i start flashing my phone XS++ say this :

11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| PHONE INFO
11:29:55| ++++++++++++++++++++++++++++++++++
11:29:55| DBID: db2010
11:29:55| OTP CID: 36
11:29:55| EROM CID: 36
11:29:55| EROM color: Brown
....
11:30:50| Binary acknowledge failed with: 15
11:30:50| Failed
11:31:10| ++ Error: Flashing failed
11:31:10| Disconnected... Unplug the phone


what cant i do with this ?

is the same answer if i flash to any version of firmware ....

man... flash your eprom so your phone looks like this
OTP CID: 36
EROM CID: 36
EROM color: RED

after that reflash main and fs via dcu+xs++ and finalize with FAR

[reading]

The problem is here------11:29:55| EROM color: Brown
You should change brown to red!