ANYBODY KNOW how to link the w880i to xs++

[houjixing]

i tried to press c button and plug the usb cable,but phone always turn on straight-away,anybody knows what is wrong?

[frisko_]

ye, u need to install usb flash drivers and i think this wont happen again.

link: http://www.wotanserver.com/USBFlashDriver.exe

[ts014]

u also have 2 remove the battery for a few seconds the connect to the computer holding down C

[uiop]

If it still doesn't work, you should try to remove any usb-cable drivers and reinstall them. It worked for me after trying just about anything.
good luck

[oceanever]

hey man, for the w880 you don't press "c" button you have to press the number "2" button.

[amko]

hello, I allways connect holding down number "2" and "5" together and then connect the cable. Try that.

[JoMacHo]

Are u using windows XP?

[jagadeesh]

First install XSS++ and and then install phone usb cable drivers, example gg-setup usb driver, you will find one in top sony, install it, connect your usb cable to computer and phone, computer will detect usb cable automatically and message will pop up saying found new hardware example phone connected, remove the usb cable after being detected, charge your mobile battery fully, remove battery from mobile, reinsert battery in mobile, open xss program, click connect in xss++ it says u have 30 seconds connect, hold C button in mobile,connect cable, xss will give u logs, better to have windows xp os, and thats the way, good luck.

[marnraay]

like oceanever said

w880i don't press "C" to connect program
my friend him press "shotcut" button
I'm not sure this it's name
I mean the back button in our phone it like that " <--) "

[idumbakuma]

may be problem with t usb driver install proper drivers and check ur cable and fast port.do the procedure properly u shouldn't connect the cable first and hold the C button.
first hold the button then connect the cable.