W300i Configuration Error

[d2thepixie]

Ok...that worked...restoring the GDFS now allows me to detect the phone with XS++

I Opend it with XS++ and tried to flash my firmware and FS including the custpack...
Now in the right boxes...

and this is what i get...

17:11:48| XS++ v3.1 (Darwin) Ready !
17:11:48| Executed on Microsoft Windows XP
17:11:53|
17:11:53| Attempting to open the interface...
17:11:53|
17:11:53| TURN OFF PHONE!
17:11:53| Hold 'C' button on phone and connect phone NOW.
17:11:53| You have 30 seconds...
17:11:53|
17:12:00| Baseband ID: 8040
17:12:00| Protocol Version: 3.1
17:12:01|
17:12:01| Sending db2010_cid00_prodid_p3l.bin...
17:12:01| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:12:01| This is a PRODUCTION_ID loader
17:12:01| Activating GDFS...
17:12:01| Cannot open GDFS
17:12:01| Activating GDFS...
17:12:01| Cannot open GDFS
17:12:01| Activating GDFS...
17:12:01| Cannot open GDFS
17:12:01| Activating GDFS...
17:12:01| Cannot open GDFS
17:12:01| Activating GDFS...
17:12:01| Cannot open GDFS
17:12:01| Warning: IMEI name does not match GDFS name (IMEI:W300 GDFS:n/a)
17:12:01| ...using IMEI name
17:12:01|
17:12:01| Profiling SEMC phone...
17:12:01| Platform: DB2010
17:12:01| OTP CID: 49
17:12:01| EROM CID: 49
17:12:01| EROM Color: Red
17:12:01| IMEI: 35424401xxxxxx
17:12:01| Phone ID: W300
17:12:01| Region: n/a
17:12:01| CDA: n/a n/a
17:12:01| Firmware Version: n/a
17:12:01| EROM: n/a
17:12:01| Ready for operation!
17:13:56| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:56| Custpack: AMERICA_2 (CDA102499/112) (W300)
17:13:56| Generic(non-branded) custpack: No
17:13:56| Allowed languages: en, pb, xl,
17:13:56| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:14:15|
17:14:15| Sending db2010_cid49red_flash_r2a003.bin...
17:14:15| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
17:14:15| This is a FLASH loader
17:14:15| Now flashing firmware main...
17:14:18| Flashing c:\documents and settings\desktop\w300i_r9a036_main_generic_je_red4 9.mbn
17:14:19| Header type: BABE
17:14:19| 336 flashblocks

At the bottom in the status bar its been stuck on "Sending Flashblock: 1/336"
for the past half hour...

So where to from now...

I dont know what my battery status is...I did fully charge it before all of this...

This is what SE Tool Lite Gives me now that ive restored the GDFS...

welcome to setool2 lite edition v 1.06
supported DB2010/DB2012 CID49, DB2020 CID49/CID51/CID52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401515591 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
ldr_on_ldr hdr no ack,err:10
can't load loader
Elapsed:10 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
Can't load id loader !
Elapsed:9 secs.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:7 secs.

As to the possible RECOVERY...my recovery button is not pressable...if u understand me. So how do i do the RECOVERY??