Results 1 to 8 of 8
  1. #1
    Recently Initiate mogyi1888's Avatar
    Join Date
    Nov 2007
    Device
    -
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Dead K800i - Help Please

    Hi people.

    my trusty K800i has decided to go in the huff after a year of good service!

    When turning on it has the White Screen Of Death.
    Sometimes when you put the battery in the red light at the camera comes on or the flash starts flashing repeatedly.

    Have tried using the Wotan Software and pressing 2&5 etc. Done this but it seemed to fail.

    Got the XS++ software but not sure what to do now.

    p.s This is a contract phone which was allegedly insured - only found out that the dealer had swapped the sim from another phone and hence invalidated my insurance :mad:

    any help or suggestions are appreciated.

    I would be willing to pay for the downloads if i knew exactly which ones to get! :confused:

    cheers :D

    here is the log from the XS++ thingy if it helps

    10:48:03| Profiling SEMC phone...

    10:48:03| Platform: DB2020

    10:48:03| OTP CID: 49

    10:48:03| EROM CID: 52

    10:48:03| EROM Color: Red

    10:48:03| IMEI: 35170701xxxxxx

    10:48:03| Phone ID: K800

    10:48:03| Region: MEDITERR

    10:48:03| CDA: CDA102568/4 R4A

    10:48:03| Firmware Version: R1CB001

    10:48:03| EROM: R3A016

    10:48:03| Ready for operation!
    Last edited by mogyi1888; 11-16-2007 at 10:47 AM. Reason: Automerged Doublepost

  2. #2
    Banned
    Join Date
    Jul 2007
    Device
    -
    Posts
    709
    Thanks
    25
    Thanked 278 Times in 100 Posts
    1. Why do you think Wotan failed? Did it give you something like "SEMSEC status 3" or similar? That indicates that your EROM is up to date.

    2. The files you need:
    A MAIN, a FS and a custpack. You can choose any firmware you like. R8BA024 is the latest one. Choose MAIN_Generic, FS_Mediterr and make sure, that they are RED52! This is important.
    Downloads - k800custpack - HB1-06_Gen_CDA102568_4_R6A_GENERIC_MEDITERR - Top Sony Forums <--- this is the custpack you need, regardless which firmware you choose.

    You can use the XS++ 2.x flashing guide from our tutorials section, it's quite easy to understand.

  3. The Following User Says Thank You to ts013 For This Useful Post:


  4. #3
    Recently Initiate mogyi1888's Avatar
    Join Date
    Nov 2007
    Device
    -
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    cheers for the quick reply :)

    wotan reported
    EROM : starting upgrade
    EROM : done
    ERROR :
    SEMCSEC status 3
    ==FAILED==
    duration 00:01

    do you think if i upgrade the firmware i will be able to fix the phone?

    also do i pay for and downloads the files you say from this website?

    abit new to all this as you can probably tell ;)

    right i need this - Downloads - k800custpack - HB1-06_Gen_CDA102568_4_R6A_GENERIC_MEDITERR - Top Sony Forums

    and this -
    Downloads - R8BA024_RED52 - K800_R8BA024_FS_MEDITERR_RED52 - Top Sony Forums

    but i havent a clue what 'a MAIN' is????

    help! :confused:

    woop woop!

    i got it working again! followed the instructions and it worked a treat :D

    well worth the £1.49 i paid :D:D:D

    cheers dude!
    Last edited by mogyi1888; 11-16-2007 at 01:25 PM. Reason: Automerged Doublepost

  5. #4
    Recently Initiate
    Join Date
    Jan 2007
    Device
    -
    Posts
    14
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Ohh bad, i have the same problem, is sold it

  6. #5
    Recently Initiate
    Join Date
    Nov 2006
    Device
    -
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    k800

    k800 dead phone, how can we revive or repair the phone?. imei in gdfs is corrupted.

    need your help, thanks

  7. #6
    Recently Initiate
    Join Date
    Oct 2007
    Device
    -
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    meybe u can flash k800 with setool - i wake up this method k310 :) - w800 i wakeupped with SEUS

  8. #7
    Member The Barron's Avatar
    Join Date
    Oct 2007
    Device
    -
    Posts
    23
    Thanks
    2
    Thanked 0 Times in 0 Posts
    I revived my k800 from a similar situation by reflashing it with xs++

  9. #8
    Member Manivel's Avatar
    Join Date
    Nov 2007
    Device
    K810i
    Posts
    25
    Thanks
    9
    Thanked 2 Times in 2 Posts
    Try this page u will get lot of tutorials
    SE-NSE Forums -> Firmware Tutorials Guides

  10. The Following User Says Thank You to Manivel For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •