Best Cam Driver For W810i

[Mrnetwork]

which driver
hmm hello dude
plz every one post the pic to take with ur phone and also mention the cam driver
just for looking the which cam is the best for cell our cell phone
thanks

[Mrnetwork]

I have Far manager with SEFP 0.10.0.44 but I can't get into W810 FS. Can anyone gude me how to do so:eek:

Oh man 1st off all visit the Tutotial & guides Thread There is Alot of Tutorial plz and then moddding ur Phone
thanks
read this tutorial
http://www.topsony.com/forum/showthread.php?t=45

[Flawless]

so... after reading i can't understand which one is the best camdriver for w810 :((

In my opinion, the best camdriver for W810i is the original! The rest, is just tuneups! Nothing works that good as the 4.5 camdriver. It's only a 2 Mpx camera. I use this to get the noise out of the pictures.
And, there is NO driver that can make the camera take pictures without noise!
I dare anyone, take a picture with the phone (W810i), post it here, and then I will process it and post it again. No matter what you try to achieve with tuned drivers, this are the limits of the camera!

[avalon]

Ok, I'll make this short. For W810 4.5 original IS the best camdriver. BUT Sarmad @ esato has implemented new features (ENM is awesome!).

Go to: http://www.esato.com/board/viewtopic...737&start=1650 and leave the discussion there...

--
AvaloN

[Kriomag]

Kriomag v21.8 (donors: 7.7 Final, 8.53, 8.54)

- Base driver: 21.4
- 2 Quality Modes (Picture Quality NORMAL: Default Modes, Picture Quality FINE: EM/ENM/LedEM/LedENM)
- JPEG 89% (for Normal & Fine Picture Quality)
- Super Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
- Advanced Zoom (Default x4 for Photos & NightMode VR, Smooth Linear x16 for NormalMode VR)
- AE Lock
- Enhanced Modes Support WB Profiles (also with LED)
- Autofocus fixed! - thx janek


Instructions:

Super Manual Focus:
Turn Macro ON.
When in range 1.2-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter),
now (when zoom is on) you can adjust focus very precisely (+/-),
when picture is most sharp click half-shutter again (the zoom will go off and EV will be corrected)
and now press shutter to take picture. enjoy!

2 Quality Modes:
Picture Quality Normal:
- Normal Mode = Normal Mode,
- Normal Mode + LED = Normal Mode + LED,
- Night Mode = Night Mode,
- Night Mode + LED = Night Mode + LED.
Picture Quality FINE:
- Normal Mode = EM,
- Normal Mode + LED = LedEM,
- Night Mode = ENM,
- Night Mode + LED = LedENM.

New Options:
- Now you can take EM Picture with Zoom (Picture Quality FINE + Macro OFF)
- Now you can use Super Manual Focus without EM/ENM (Picture Quality NORMAL + Macro ON)

Links:
http://www.rogepost.com/n/2455321714
alternate link:
http://s15.quicksharing.com/v[....]5/Kriomag_v21.8_fixed.rar.html

Samples:

[kurikapooh]

i've got a question, if i update my cam driver will my camera menu settings will it overwrite the original camera settigns?

[Chopz]

I use Kriomag's 21.7 now and will give his latest one a try also. keep up the good work man!

[sannyo]

Hi! Maybe it isn`t the right place to post my message: anyone can tell me with FAR + SEFP before i upload the new cam driver i need to delete the old one (of course make a backup from the original) or just replace it...???

Edited: again a question :) i downloaded a few cam drivers and in a zip i found some verison to erom.. my erom is R3A005, but the package don`t contains it... ( have only to R2B001 and R1CA021) so if i install it can i make demage in my phone ??? or if the cam don`t works just change the cam driver with the original ???

thx to all
Alex

[killerduck]

there is actually another driver by Samrad .... I think it is the 4.81 .... But i couldn.t find it

[AquaZX]

Hi! Maybe it isn`t the right place to post my message: anyone can tell me with FAR + SEFP before i upload the new cam driver i need to delete the old one (of course make a backup from the original) or just replace it...???

Alex

What am I doing: delete old and then copy new one..