Best Cam Driver For W810i

[Mrnetwork]

I have Far manager with SEFP 0.10.0.44 but I can't get into W810 FS. Can anyone gude me how to do so:eek:

Oh man 1st off all visit the Tutotial & guides Thread There is Alot of Tutorial plz and then moddding ur Phone
thanks
read this tutorial
http://www.topsony.com/forum/showthread.php?t=45

[Flawless]

so... after reading i can't understand which one is the best camdriver for w810 :((

In my opinion, the best camdriver for W810i is the original! The rest, is just tuneups! Nothing works that good as the 4.5 camdriver. It's only a 2 Mpx camera. I use this to get the noise out of the pictures.
And, there is NO driver that can make the camera take pictures without noise!
I dare anyone, take a picture with the phone (W810i), post it here, and then I will process it and post it again. No matter what you try to achieve with tuned drivers, this are the limits of the camera!

[avalon]

Ok, I'll make this short. For W810 4.5 original IS the best camdriver. BUT Sarmad @ esato has implemented new features (ENM is awesome!).

Go to: http://www.esato.com/board/viewtopic...737&start=1650 and leave the discussion there...

--
AvaloN

[Kriomag]

Kriomag v21.8 (donors: 7.7 Final, 8.53, 8.54)

- Base driver: 21.4
- 2 Quality Modes (Picture Quality NORMAL: Default Modes, Picture Quality FINE: EM/ENM/LedEM/LedENM)
- JPEG 89% (for Normal & Fine Picture Quality)
- Super Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
- Advanced Zoom (Default x4 for Photos & NightMode VR, Smooth Linear x16 for NormalMode VR)
- AE Lock
- Enhanced Modes Support WB Profiles (also with LED)
- Autofocus fixed! - thx janek


Instructions:

Super Manual Focus:
Turn Macro ON.
When in range 1.2-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter),
now (when zoom is on) you can adjust focus very precisely (+/-),
when picture is most sharp click half-shutter again (the zoom will go off and EV will be corrected)
and now press shutter to take picture. enjoy!

2 Quality Modes:
Picture Quality Normal:
- Normal Mode = Normal Mode,
- Normal Mode + LED = Normal Mode + LED,
- Night Mode = Night Mode,
- Night Mode + LED = Night Mode + LED.
Picture Quality FINE:
- Normal Mode = EM,
- Normal Mode + LED = LedEM,
- Night Mode = ENM,
- Night Mode + LED = LedENM.

New Options:
- Now you can take EM Picture with Zoom (Picture Quality FINE + Macro OFF)
- Now you can use Super Manual Focus without EM/ENM (Picture Quality NORMAL + Macro ON)

Links:
http://www.rogepost.com/n/2455321714
alternate link:
http://s15.quicksharing.com/v[....]5/Kriomag_v21.8_fixed.rar.html

Samples:

[kurikapooh]

i've got a question, if i update my cam driver will my camera menu settings will it overwrite the original camera settigns?

[sannyo]

Hi! Maybe it isn`t the right place to post my message: anyone can tell me with FAR + SEFP before i upload the new cam driver i need to delete the old one (of course make a backup from the original) or just replace it...???

Edited: again a question :) i downloaded a few cam drivers and in a zip i found some verison to erom.. my erom is R3A005, but the package don`t contains it... ( have only to R2B001 and R1CA021) so if i install it can i make demage in my phone ??? or if the cam don`t works just change the cam driver with the original ???

thx to all
Alex

[killerduck]

there is actually another driver by Samrad .... I think it is the 4.81 .... But i couldn.t find it

[AquaZX]

Hi! Maybe it isn`t the right place to post my message: anyone can tell me with FAR + SEFP before i upload the new cam driver i need to delete the old one (of course make a backup from the original) or just replace it...???

Alex

What am I doing: delete old and then copy new one..

[xXx2277]

here is the newest supercam driver 8.54:cool:

[mladen750i]

Click here and try this...