w600i help please!!!

[spaceace19]

I have searched this forum with a fine tooth comb and still can't find what i'm doing wrong...my w600i had the WSOD, i'm in the united states using cingular, i flashed with xs++ using
"W600_R7CA017_MAIN_GENERIC_EE_RED49.mbn" "W600_R7CA017_FS_AMERICA_1_RED49.fbn" "W600i_CDA102453_17_022706_Cingular_Wireless_U SA" (custpack)

still get "Configuration error. Please contact your network operator or servive center"

what's the missing piece of this puzzle?

Please HELP!!!! phone is out of warrenty

[djtetei]

I have searched this forum with a fine tooth comb and still can't find what i'm doing wrong...my w600i had the WSOD, i'm in the united states using cingular, i flashed with xs++ using
"W600_R7CA017_MAIN_GENERIC_EE_RED49.mbn" "W600_R7CA017_FS_AMERICA_1_RED49.fbn" "W600i_CDA102453_17_022706_Cingular_Wireless_U SA" (custpack)

still get "Configuration error. Please contact your network operator or service center"

what's the missing piece of this puzzle?

Please HELP!!!! phone is out of warranty

There is one little thing missing in your configuration and this is the right CDA (custom pack) file. Because you are trying to flash a FS file for AMERICA 1 zone, you should use a CDA (custom pack) for AMERICA 1.

If you want to flash your W600 phone successfully, you have to use the following files:
- W600_R7CA017_MAIN_GENERIC_EE_RED49
- W600_R7CA017_FS_AMERICA_1_RED49
- W600i_CDA102453_120905_120905_Generic_Trade_USA_AM ERICA_1

Good luck! Be well!

[spaceace19]

I guess my phone is shot unless someone has a brilliant idea...thanks:o

[djtetei]

I guess my phone is shot unless someone has a brilliant idea...thanks:o

Then try AMERICA 2 or LAM AMERICA files!
And try to follow the corect steps for firmware flashing.

If you use a generic firmware file together with corresponding FS and CDA files, the phone must work for sure. If not, it's got got to be a bigger problem with it that may require service.

By the way, what software do you use for firmware flashing?
If you use XS++, consider using SETool2Lite. It is more stable.

[spaceace19]

SETool2Lite ended with an error...thanks for the help

SETool2Lite ended with an error...thank for the help

[ts013]

Please post up your logs if you get errors.
It is always easier for us to help you if you post logs of the procedures you've done.

[gunhead]

First of all, try SEUS.

[giank]

same problem with the WSOD on my W600.
I'm italian, which files do I need to flash? and will it solve the problem?
thanks for helping ;-)

[farrukh]

gun dude is right in case of wsod always try seus first
and if it is givin configuration error flashing right cust pack will fix it

[ejeffay]

hey guys, i've done alotta reading and alotta troubleshooting but so far nothing seems to solve my problem. I first wanna thank any1 for takin the time to give any advice.

I also have a W600 and i've gone thru the steps with the same FS and MAIN firmware version and did NOT successfully complete the flashing/debranding. The reason for this is becuz it kinda froze on me on the 'activating Filesystem' screen. This is using version 1, 1.2, 3, and 3.1 of XS++. I'm not currently at home so i have yet to try SETools2Lite (but i do have the program, just gotta look up on how to use it)..so the problem is the customizing to finalize the procedure. i've tried with the CDA's given in XS++ that go accordingly with my FS/Main whether it be america1 or america2 (i have both FS AM1 and AM2, tried both, neither made a difference)...i've even tried using the FAR manager to manually input the files into the correct folders within the TPA directory...still no luck (unless i did something wrong there, because after that attempt the phone wouldn't even turn on)...so i reflashed it and it froze again at the 'activating filesystem' screen again....the first time it did this, i let it continue for +8hrs....but the battery died on the phone and so i had to stop the procedure. Sorry for making this post so long but this isn't actually my phone. it's a friends and i said i'd do this favor for him. Any suggestions guys?....(i've also downloaded CDA's from this site both that are for the phone specifically...(rogers - Canada))

i forgot to also mention that i tried using the SE update tool itself and that didn't work either....it gives me that darn "contact administrator' screen or whatever it says....i'd just like the phone back in working order, whether debranded/unlocked or not...