need help dead phone fixable?

[blackpaw]

Ok last month i joined these forums before then i never knew it existed
and people here really seem helpful.

my first post was about my w810i phone
http://www.topsony.com/forum/showthread.php?p=39833

up to now i haven't been able to fix it and would like to know am i wasting my time should i just replace the phone with another? as now it wont even turn on

SEUS gets to 96% updating then freezes

I have a gdfs backup of the phone before i did anything to it with my computer (phone was turning on screen was white, speakers never worked, people would ring the phone and get a static if i tried to answer it and somehow the vibrate function of the phone would work and the alarm would constantly go off vibrating)

got a little off topic there but

would like to know if u lot feel my phone is salvageable? or should i just buy a newer model

thanks in advance

[Boki92]

Ok last month i joined these forums before then i never knew it existed
and people here really seem helpful.

welcome to the club

anyway try flashing the phone with the right firmware, use log files to find out which is your firmware, and flash it back

[ts013]

I read through your other thread. What's going on with your phone right now?
Not turning up at all just the red light flashing or is it turning on but only showing you a white screen?
If it's just the red light flashing you'll have to write a EROM to your phone and do a full flash (MAIN,FS and custpack).
If it's showing you a whitescreen a fullflash could fix it.
Have you taken it to the service center yet? If you've still got warranty that would be the first thing you should do. Tell them what your problem is, tell them you tried SEUS but do NOT tell them you tried to do anything with SE Tool etc. if you did that.

[blackpaw]

the phone doesn't turn on at all
when i connect phone to computer nothing shows up
when connecting to Setool and all that when i plug cable in it automatically connects to phone i don't need to hold c (could c be held down somehow preventing phone from starting up?)

also the red light does not blink at all

when i plug the charger in i get a steady red light

[Boki92]

the phone doesn't turn on at all
when i connect phone to computer nothing shows up
when connecting to Setool and all that when i plug cable in it automatically connects to phone i don't need to hold c (could c be held down somehow preventing phone from starting up?)

also the red light does not blink at all

when i plug the charger in i get a steady red light

remove the battery and insert it again

[ts013]

Boki92: don't you think he did that several hundred times since that phones dead now for some weeks?! :p

blackpaw: Now thats strange...please post the log of SE Tool

[blackpaw]

i have several logs from setool2

what information from the logs would be required as not all the logs are the same

sorry for the newbish sort of question

[ts013]

What do you mean "several logs"? Did you perform actions with se tool(flashing etc.).
First of all the log you get when you connect the phone.
If you've done any other actions with SE Tool lite you could attach the whole log.
But start off with the log when you just connect.

[blackpaw]

ill start with the basic as other logs are for things such as
backing up the gdfs

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:************** CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4DB005_CXC1250320_VODAFONE_HN
Restore from:R4DB005_CXC1250320_VODAFONE_HN
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
stated number of vars:1274
Found:842 variables
Found:370 variables
Found:62 variables
GDFS read all done, GDFS.BIN written
Phone detached

that was my first gdfs backup

i repeated backup there now and gdfs seems really small compared to other heres log

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:************* CERT:RED
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
unsupported combination.
Elapsed:27 secs.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:************* CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4DB005_CXC1250320_VODAFONE_HN
Restore from:R4DB005_CXC1250320_VODAFONE_HN
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
stated number of vars:1274
Found:842 variables
Found:432 variables
GDFS read all done, GDFS.BIN written
Phone detached
Elapsed:79 secs.

[Khaba]

if you have time, please try to "Identify" with SeTool and post that log. As I know if the red light is blinking then the EROM is damaged.