Installing new java certificate - K800 ?

[spAik]

no way to access it, your costumize-files are corrupted. i woudl recommand reflashing.
Back to topic: Have u tried it? Everytime i try it with the customize_upgrade.xml-file my phone only displays "error - call your service provider"
Perhaps i only got the wronf giles. Can someone point me to a "ready-to-go"-halmper-package? :)

[Caspar]

Is it possible to do the above with a K800 which has a R1GB001 and CID52 firmware?

Thus, it wrote here instruction for the filling into the telephone of halmer.cst through DavinciFlasher (this must ONLY for the telephones with CID51,52 since PhoneX with this CID[om] it does not be friends thus far):
1. We rock DavinciFlasher 18.4
2. We buy da Vinci's ravine for 5$
3. Is discovered DavinciFlasher,
4. We place [galochku] on Advanced, we go in Advanced, we place [galochku] Of customization, we select the file of customize_upgrade_halmer.cst, we harvest ok
5. We harvest Flash, then we connect telephone with the stopped up button “[s]” (on the telephone)
6. We go we smoke, and after arriving, file it will be flooded into the telephone
here [mnzhestvo] of the methods:
For those, constant demands tired to whom on leaving into the Internet or with the turning to the file system Of java - [apletov] it is devoted….
We pour the certificate Of halmer' a through Far Of plugin CID 36/49
1) we draw off customize_upgrade_halmer.rar, we unpack.
2) We start Far Of plugin, we go in FS/tpa/preset/custom/
3) we copy into FS/tpa/preset/custom/of customize_upgrade.xml and halmer.cer
we pour the certificate Of halmer' a through the client of da Vinci
the first, that it is necessary to make, to purchase one Log da Vinci - to here purchase it will be able each, for example, with the aid of WebMoney, it stands 5$.
We draw off the necessary files:
1) Client of da Vinci
2) driver for DCU-60
3)file CST
checking the cable:
1) We install driver for the cable, for this we turn off telephone, then we press button “[s]” on the telephone and, without releasing it, we put cable in the telephone. System will find new equipment, by hand indicate way to the driver in the master of the installation of new devices.
2) Let us test cable with the aid of the client of da Vinci. We start it, harvest ReadCID/TestCable. We press “[s]” on the telephone, put cable.
Attention! During all subsequent actions your computer must be constantly connected to the Internet!
We pour the certificate:
1) We start the client of da Vinci
2) we introduce purchased [login] and password, we place jackdaw opposite Advanced, we harvest to advanced of settings,
3) will appear window, in it we place jackdaw opposite Customization, we indicate way to the [skachannomu] CST- file, harvest [ok].
4) One additional window will appear, in it we place jackdaw opposite both files, we harvest ok, then we harvest large button FLASH, client [rugnetsya], that the basic files of main and fs be sewn will not be, nevertheless we continue, we await…
Writing Of custom Of files…
Uploading of customize_upgrade.xml
Of uploading halmer.cer
Uploated Of successfully!
Execution Of time - 00:02: 43
Done!
5) If below to the left in the client you saw this inscription, then you pierced certificate.
6) We disconnect telephone from the cable, we include telephone.

We sign Java:
1) To [skachat] EQ_Halmer.rar
2) to neglect the file Of eQHalmer.exe, to harvest button A and Enter.
3) To select necessary jar- file, to harvest on it by the right button of mouse and to select the point Of halmer.
4) We pour those obtained of jad & of jar into the telephone into the folder “other”. We search for jad (it usually higher than jar'a and they they are always next located). We harvest “to establish”. After everything was established, we go into the applications of the function of authority and with the large lightening note that reading \ the record of files, the access into the Internet etcetera can be noted as “WITHOUT THE DEMAND”.


Thanks to the author INFerno

[kozak]

hey does anybody know how i can connect my k800 to phoneXS ot XS++ because i was looking for so long and i still cant connect my phone pls help.
My phone is brown what should i do!
PLEASE HELP!

THANKS

KOZAK

[OWIES]

BROWN phones are not supported by XS or Phone XS

if you want use XS or phone XS you shoud have a RED certificate

[kust]

XS++ suports BROWN phones but there is no brown flash files for it. Setool (not cracked) can convert to RED one.
Good luck!

[OWIES]

XS++ suports BROWN phones

can you give me some proof for that ?

[se_k750i]

XS++ doesn't support brown - only special version of PhoneXS can support it ;)

[gnas24h]

Yes! Procedure is the same.

[louis*cyphre]

BROWN phones are not supported by XS or Phone XS

if you want use XS or phone XS you shoud have a RED certificate

lol he ment he has BROWN COLORED phone, not brown firmware lololol

[Harshit]

I am not able to upload the certificate to my phone using XS++. I have W550i CID49

21:00:05| PORT STATUS: ACTIVE
21:00:05| Baseband ID: 8040
21:00:05| Hardware Platform: db2010 Marita compact
21:00:05| Protocol Version: 3.1
21:00:05| AutoReturnCollectingSending loaders\db2010_cid00_prodid_p3k.bin...
21:00:05| This is a PRODUCTION_ID loader
21:00:05| ***** Read flash vendor & id (cmd 0D)
21:00:05| ***** Read otp (cmd 24)
21:00:05| Activating GDFS...
21:00:05| phone name detected
21:00:05| Return
21:00:05| PHONE INFO
21:00:05| DBID: db2010
21:00:05| OTP CID: 49
21:00:05| EROM CID: 49
21:00:05| EROM color: Red
21:00:05| IMEI: 35744400xxxxxx
21:00:05| Phone: W550
21:00:05| Operator: EMEA_6
21:00:05| CDA: CDA102426/106 R2A
21:00:05| Firmware: R4CB020
21:00:05| EROM: n/a
21:00:05|
21:00:05| Ready for operation!
21:04:09| You must choose a way in!Error: FSX failed.
21:04:09| ++ Error: FSX failed
21:04:11| Disconnected... Unplug the phone
21:04:18| Shutting down...

Can anyone help me?