Probleme Cam With W810i

[zakagadir]

With My Sonyericsson W810i When I Click Cam In Menu Dosn T Work
Is It Hard Or Soft Probleme

so i think i must flash it with setoollite

[eapiauhy]

i have a same problem.

need help

[ts014]

have u tryed an update with seus or chaning the camdriver?????

[zakagadir]

how change cam driver

[e.chau]

you may have not connected the cam socket correctly to the main board when you changed the casing, that could be a problem why the cam is not working, it just shows a black screen. if not the problem let me know and i can help you

cam drivers can be changed by using far and flashing a w810i pku file to it using phone xs into the main or uploaded using setool2lite in the misc location

[starlyt]

hhhmmmm i had the same problem. It was caused by the memory card. When I changed the memory card. It worked again.

[w810ijunky]

i have a problem too..if i push the halfshutter the AF does his job but if i push it down the AF goes away and i have to aim again... is it an hard or sotware problem?

[zakagadir]

can evrybody show me how to change cam driver into my phone using setoollite or xs++
i know i must make something like this tpa/present/system/...

i repeared my cam with xs++
1.download xs++ and extract it
2.where xs++.exe is, is a folder called files_to_upload
3.extract my ifs.zip in the folder files_to_upload
4.start up xs++
5.press connect
6.remove phone battery for a few secs then put it back in
7.holding down C on the phone plug-it in to ur pc
8.now go to FSX
9.press start FSX
10. give it a few minutes then ur done