Wotan Flash Failed

[mlm122]

Hey guys... I have a secondhand 580i.. won't even turn on though.. and yes I've charged the battery.so I tried to flash it with Wotan, and everything cooked along till the end when it gave"wrong header" "Flash Failed" messages. I have retried choosing different firmware each time.

I also tried the EROM fix deal pressing 2+5 connected to Wotan: here's what I got :

WotanClient 1.0.2
RUNNING UPDATE
FTP: connecting to server eagle.wotanserver.com
FTP: connecting to server
FTP: downloading - please wait
FTP: close
ZIP: unpacking data...
ZIP: done
UPDATE FINISHED
Connect your phone, pressing "C"
waiting...
phone found.
phone found at position 1
DB2020 detected
CL00 CI00 OCI00 __ __ __ SL00 OCL00 __
LOADER: OK
061220 1711 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3K
FC ID: 89 7E
connecting to server
connection OK
sending login
login OK
EROM: starting upgrade
EROM: done
ERROR:
SEMCSEC status 3
== FAILED ==
Duration: 00:01

Thanks for any and all help!! WotanClient 1.0.2
RUNNING UPDATE
FTP: connecting to server eagle.wotanserver.com
FTP: connecting to server
FTP: downloading - please wait
FTP: close
ZIP: unpacking data...
ZIP: done
UPDATE FINISHED
Connect your phone, pressing "C"
waiting...
phone found.
phone found at position 1
DB2020 detected
CL00 CI00 OCI00 __ __ __ SL00 OCL00 __
LOADER: OK
061220 1711 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3K
FC ID: 89 7E
connecting to server
connection OK
sending login
login OK
EROM: starting upgrade
EROM: done
ERROR:
SEMCSEC status 3
== FAILED ==
Duration: 00:01

Thanks again for any all help!

[ts013]

The error you get does only mean that your EROM is up to date.
Please post the log of the flashing process.
You can try to flash with XS++ or SE Tool lite, too.

[mlm122]

The error you get does only mean that your EROM is up to date.
Please post the log of the flashing process.
You can try to flash with XS++ or SE Tool lite, too.

Thanks Justme!.. is there any reason to believe SETool or XS++ would succeed where Wotan didn't? Just wondering.

here's the log :
Connect your phone, pressing "C"
waiting...
phone found.
phone found at position 2
DB2020 detected
CL04 CI34 OCI33 _01127xxx_ _CDA102774/102_ _W580i_ SL00 OCL01 _R3A022_
LOADER: OK
061220 1711 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3K
FC ID: 89 7E
EROM: RED CID52
OTP: RED CID51
OTP: IMEI 01127xxx
GDFS: W580i
GDFS: CDA102774/102
internal DB number is 2020

Now you can choose Main and Filesystem files,
and alter other settings
blocksize 0x4000
Internal DB changed to 2020
FLASHLOADER: writing header
FLASHLOADER: writing prologue
FLASHLOADER: writing payload
FLASHLOADER: OK
061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
STARTING FTP CLIENT
/pub/finalize_files/w580/
CDA102774-67 R2A.wtf
FTP: connecting to server eagle.wotanserver.com
FTP: connecting to server
FTP: downloading - please wait
FTP: close
Starting integrity checks
CUST: integrity OK
MAIN: integrity OK
FS: integrity OK
FOTA: integrity OK
FLASHING MAIN FW:
flash/W580_CXC1123362_GENERIC_LA_R6BC002_RED52.wtm
C:\Documents and Settings\bob.VALUED-B8142DE8\Desktop\MONICA\misc progs\Wotan
FLASH: fetching key
::: stage001
::: stage002
::: stage003
::: stage004
::: stage005
::: stage006
::: stage007
::: stage008
::: stage009
::: stage010
::: stage011
FLASH: decrypting
::: stage012
::: stage013
::: stage014
::: stage015
::: stage016
::: stage017
::: stage018
::: stage019
::: stage020
FLASH: CID 52 / 460 blocks
FLASH: writing flash
ACK GET FAILED!!!
FLASH: wrong header
== FAILED ==
Duration: 00:01

[ts013]

The reason why I recommended SE Tool and XS is that I know them better (so does everyone on this forum) and that it's free.
Your problem looks like you got a bad flashfile. That's really confusing because your downloading the file directly from Wotan. Have you tried to take a different firmware version?

[mlm122]

The reason why I recommended SE Tool and XS is that I know them better (so does everyone on this forum) and that it's free.
Your problem looks like you got a bad flashfile. That's really confusing because your downloading the file directly from Wotan. Have you tried to take a different firmware version?

Yes, I was offered 3 different firmware versions, and tried just about every file under each that 1) contained English language and 2) matched my CDA #. That log I posted was just one of several,... same msg every attempt. So what does the "wrong header" msg mean, do you know?

I'm nervous about trying to do this myself via XS or Setool.. might really trash my phone. I really am just starting to fiddle around w mods. I have used Wotan without a hitch on my W810i and really like the changes.

I should probably mention that after the flash attempts I tried charging my phone again.. no display so I can't tell if it's accepting a charge.. but the red light under the "C" comes on for maybe 5 seconds, then nothing again.

Thanks again much for trying to help.

[ts013]

Ok, that looks like there's a problem with the phone itself. I never had a W580 and don't know what the red light indicates.
Could you download XS++ and/or SE Tool lite and post the logs when you just identify the phone? Maybe that'll bring a bit more light into the dark that we're in right now ;)
Since your doing nothing with XS/SET but identifying the phone you don't need to be worried about doing something wrong

Do you know what happened to the phone? Could you contact the one that you've got it from?

[Khaba]

As I know the red light means a bad EROM, connect your phone to XS and post the log, please.

[mlm122]

Ok, that looks like there's a problem with the phone itself. I never had a W580 and don't know what the red light indicates.
Could you download XS++ and/or SE Tool lite and post the logs when you just identify the phone? Maybe that'll bring a bit more light into the dark that we're in right now ;)
Since your doing nothing with XS/SET but identifying the phone you don't need to be worried about doing something wrong

Do you know what happened to the phone? Could you contact the one that you've got it from?

ok.. I will try SE Tool lite... have read in the forums it's a bit more noob-friendly than XS. Thanks!

[Khaba]

don't forget, start SeTool press Identify and connect phone, BE VERY carefull what you press.

[mlm122]

As I know the red light means a bad EROM, connect your phone to XS and post the log, please.

will post a log tonight after I d/l the software.. I did try to update the EROM last night, thinking that was the problem... here's the log from that :

WotanClient 1.0.2
RUNNING UPDATE
FTP: connecting to server eagle.wotanserver.com
FTP: connecting to server
FTP: downloading - please wait
FTP: close
ZIP: unpacking data...
ZIP: done
UPDATE FINISHED
Connect your phone, pressing "C"
waiting...
phone found.
phone found at position 1
DB2020 detected
CL00 CI00 OCI00 __ __ __ SL00 OCL00 __
LOADER: OK
061220 1711 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3K
FC ID: 89 7E
connecting to server
connection OK
sending login
login OK
EROM: starting upgrade
EROM: done
ERROR:
SEMCSEC status 3
== FAILED ==
Duration: 00:01