Number1 2.8 final k790/k800/k810 camdriver

[ts014]

2.8
better buffers 1.5mb 3mp,1.2mb 2mp,1mb 1mp,900kb VGA
less sharpness to fix blurred jagged edges and give a real picture,
enchaned landscape mode less sharpness for a real picture,exposure is standard
new colour/compression system to give real colours like 3.2mp sony cybershot digtal camera,
contrast increased,brightness property, and auto exposure added,
powerful noise filter 2 fix noise problem may need to increase brightness in low-light conditions,
normal mode= 92% compression fine mode= 100% compression

download

http://www.4shared.com/dir/4053424/5...28sharing.html

how 2 apply guides

how 2 apply this camdriver with setool2-
1. save my cam driver in the zip file to ur pc
2. take out ur phone battery
3. open up setool2 lite and select ur phone model
4. use the misc box and select the ifs.zip file
5. press flash
6. put phone battery back in and plug ur phone into pc holding down C

how 2 apply this camdriver with xs++ 2.2
1.download xs++ and extract it
2.where xs++.exe is, is a folder called files_to_upload
3.extract my ifs.zip in the folder files_to_upload
4.start up xs++
5.press connect
6.remove phone battery for a few secs then put it back in
7.holding down C on the phone plug-it in to ur pc
8.now go to FSX
9.press start FSX
10. give it a few minutes then ur done

[Stalix]

here is Number1's 2.8 compared against Kopritis's 3.5. I tried to take them all with similar positions and pointing at the same direction.

there are 4 from earch camdriver so you can cmpare.

pictures 1-3 were all set to auto shooting avarios things in a pretty dark room, and flash fire on all of then automatically.

for the 4th pictures I turned off the flash to se how it did in the dark.

my personal opnion is that kopritis still has less noise that number1's but Number1 got koptitis beat in low light situations with no flash.

keep up the good work you two :)

[ts014]

2.81
change log:
advance white balance from k770i camdriver
fixed landscape scene exposure

4shared - free file sharing and storage - share folder - 2.81

[louis*cyphre]

some of the information icons are out of place.
go to file manager--->pictures pick any pic and look at the icon layout, try landscape view it will be out of place as well.
besides doing some neat adjustments to improve picture quality,and very nice 24fps video recording (very very good), these "misaligned" icons need to be adjusted.
i will post some pics tomorrow of what im talking about.

[djsquare18]

some of the information icons are out of place.
go to file manager--->pictures pick any pic and look at the icon layout, try landscape view it will be out of place as well.
besides doing some neat adjustments to improve picture quality,and very nice 24fps video recording (very very good), these "misaligned" icons need to be adjusted.
i will post some pics tomorrow of what im talking about.

Can anyone tel me which is the easiest and shortest time taking software to use for patching for a newbie. Thanks!!!!!!!!!!!!!

[louis*cyphre]

Can anyone tel me which is the easiest and shortest time taking software to use for patching for a newbie. Thanks!!!!!!!!!!!!!

use XS++ v2.2

besides number1 already explained in the post above HOW TO


p.s. do u want to patch the firmware/software or just upload certain things to your phone?

[ts014]

2.82
changelog:
changed auto exposure to give better contrast
k850i iso values
changed flash colour temp to 7000k

http://www.4shared.com/dir/4169122/cbc0e86/282.html

[djsquare18]

use XS++ v2.2

besides number1 already explained in the post above HOW TO


p.s. do u want to patch the firmware/software or just upload certain things to your phone?

Thanks Louie I dont want to flash, Im just intrested to add new camdrivers, menus, accoustics or fonts without flashing or finalizing etc. is it possible to add this file by just copying and pasting thats it as we do it from our Pc to memory card.

I just want to add such type of files which can be even removed when nedded like rollover back to my previous cam drivers, or fonts etc.:).

Thanks in advance.

[louis*cyphre]

Thanks Louie I dont want to flash, Im just intrested to add new camdrivers, menus, accoustics or fonts without flashing or finalizing etc. is it possible to add this file by just copying and pasting thats it as we do it from our Pc to memory card.

I just want to add such type of files which can be even removed when nedded like rollover back to my previous cam drivers, or fonts etc.:).

Thanks in advance.

there is a way to do that and I did all those with XS++ on CID51 phone with no problems.
however if you are new to the whole "customizing" the phone thing I will strongly advise you to read tutorials and follow all the steps explained there.
If you want to experiment, then make sure your phone data is backed up, like contacts and whatever else you dont want to lose, BEFORE you start playing with and modifying your phone, (trust me i learned that the hard way long time ago) just in case you need to REFLASH your phone in case you do something wrong.
like i mentioned learning to use XS++ is VERY IMPORTANT, so become familiar with the program what it does.
some people like FAR MANAGER because of it "explorer like" look (drag and drop files from one window to another) but I only use it to backup FILE SYSTEM (FS) and when i get unwanted results, i flash FS to my phone and use XS++ to upload the backup i made back to my phone, restoring EVERYTHING but GAMES and APPLICATIONS content i originally had.

[ts014]

2.85 special

now updates, iso, Wb & colour,change framerates like k850i,
k850i EXIF information 1, property 11 & EXIF information 2, property 12
changed SET_REG & READ_REG,


4shared - free file sharing and storage - share folder - 2.85 special