XS++ 2.x Guide

[semaj]

Hello,

i have a w800 with red36 rom which i flashed with firmware from topsony:
W800_R1NA005_FS_EUROPE_1_RED36.fbn
W800_R1NA005_MAIN_EU_1_CA_RED36.mbn

and customized with europe1.
Problem is when turning the phone i only get the usual vibration and a white screen. I've already tried to flash my gdfs backup and, despite being successful, it failed on blocks:
00:14:13| Failed: Block 0x03 Unit 0x0FA2
00:14:13| Failed: Block 0x03 Unit 0x138A
00:14:14| Failed: Block 0x03 Unit 0x138E
and the problem persists.

Anyone knows how to solve it?????
Thank you very much!

Can you post the full log file? Most of the time if flash failed on blocks only means that your file is corrupted... gdfs should only be flashed if your phone gdfs has problems... otherwise it is not healthy... your phone might be damaged... but if XS++ can still detect phone there is no problem... by the way, which file failed? the gdfs write? the flashing of main? FS? or customization?

You said: Problem is when turning the phone i only get the usual vibration and a white screen. I think the problem here is the custom files!

[rotxa01]

Flashing, main and customization worked smoothly just as it happended when i flashed other se phones, no errors were shown during the log but when i turned the phone on there was the white screen problem. I tried to flash again but with no use. Then í restored my backed up gdfs as i read it had to be done should anything go wrong and it was succesful but failed on those blocks i mencioned. The log is in:

RapidShare: 1-Click Webhosting

Both XS++ and SEUS detect the phone with no problems but SEUS can't find a newer update for it. Could it be a display driver problem too?

Thank you very much and meanwhile i'll try to download another custpack and flash it again!

Problem solved. One of those files should probably be corrupt. I flashed it again with a diferent firmware and custpack and it works fine. Thanks to everyone.