XS++ 2.x Guide

[ts013]

Because the Filesystem needs to get activated. When the FS is corrupt XS++ can't activate it. I'm not sure if that's the problem.
Just follow semaj's advices.

[simox]

Would my phone work after that? Or would I need to reflash the firmware?

Yes, your phone will work after reading the FS. No need to flash anything...

[abmadman]

hey got the setool fundae from their website.. but I dint understand what goes into the MISC tab!
EDIT: JOB DONE!! Thanks a lot mates!

[Yodafone]

Thanks to everyone who has helped me.

But, does FSX (XS++ 3.1) work with a (I think) CID52 V630i?

[rotxa01]

Hello,

i have a w800 with red36 rom which i flashed with firmware from topsony:
W800_R1NA005_FS_EUROPE_1_RED36.fbn
W800_R1NA005_MAIN_EU_1_CA_RED36.mbn

and customized with europe1.
Problem is when turning the phone i only get the usual vibration and a white screen. I've already tried to flash my gdfs backup and, despite being successful, it failed on blocks:
00:14:13| Failed: Block 0x03 Unit 0x0FA2
00:14:13| Failed: Block 0x03 Unit 0x138A
00:14:14| Failed: Block 0x03 Unit 0x138E
and the problem persists.

Anyone knows how to solve it?????
Thank you very much!

[semaj]

But, does FSX (XS++ 3.1) work with a (I think) CID52 V630i?

Yes, it supports the V630i... you can check the XS++ help file... i forgot where i download it but you can search... there is a list of supported phones... apparently the supported phone list is not that updated... my phone is k550i and xs++ works perfectly, but it is not in the list... dont know why?

[semaj]

Hello,

i have a w800 with red36 rom which i flashed with firmware from topsony:
W800_R1NA005_FS_EUROPE_1_RED36.fbn
W800_R1NA005_MAIN_EU_1_CA_RED36.mbn

and customized with europe1.
Problem is when turning the phone i only get the usual vibration and a white screen. I've already tried to flash my gdfs backup and, despite being successful, it failed on blocks:
00:14:13| Failed: Block 0x03 Unit 0x0FA2
00:14:13| Failed: Block 0x03 Unit 0x138A
00:14:14| Failed: Block 0x03 Unit 0x138E
and the problem persists.

Anyone knows how to solve it?????
Thank you very much!

Can you post the full log file? Most of the time if flash failed on blocks only means that your file is corrupted... gdfs should only be flashed if your phone gdfs has problems... otherwise it is not healthy... your phone might be damaged... but if XS++ can still detect phone there is no problem... by the way, which file failed? the gdfs write? the flashing of main? FS? or customization?

You said: Problem is when turning the phone i only get the usual vibration and a white screen. I think the problem here is the custom files!

[gsmcall]

do yuo updata cid52?

[semaj]

do yuo updata cid52?

it is much more safe to update using SEUS....

[abmadman]

Hey i had a smiliar problem using XS++, the FS/custpack file was corrupt(and it was semaj who suggested it then too!! cheers mate!) I downloaded a different FS file with a different cust packand reflashed.. now it works..