XS++ 2.x Guide

**djape48** · 11-05-2007

**ts013** · 11-05-2007

Ok, that's nice.
Have you just flashed the firmware with SE Tool or what did you do?

**djape48** · 11-05-2007

Here is log from setool:

MAPP CXC version: R1CA021
Language Package:EUROPE_1
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250522
Default version: R1CA021

Operator: 000-00

USERCODE:0000

Elapsed:8 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301xxxxx CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1CA021_CXC1250514_EU_1_CR
Restore from:R1CA021_CXC1250514_EU_1_CR
Elapsed:69 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.

After that phone worked normally

**Yodafone** · 11-12-2007

How do I just check my CID with XS++?

**debeliz** · 11-12-2007

yus connect it with the program, and read the log

**Yodafone** · 11-12-2007

Then what do I do to disconnect the phone? Is there a disconnect button?

**Yodafone** · 11-12-2007

OK, I did it, just in case I did anything wrong, I did it with my old K510.

Now I know it's CID49

Would I need to debrand it (It's Vodafone branded) to add files to it (eg. New startup sound) and what directory do I put the startup sound? And would it require bruteforce? (Where you have to wait about 5 hours...)

**debeliz** · 11-12-2007

Originally Posted by Yodafone

OK, I did it, just in case I did anything wrong, I did it with my old K510.

Now I know it's CID49

Would I need to debrand it (It's Vodafone branded) to add files to it (eg. New startup sound) and what directory do I put the startup sound? And would it require bruteforce? (Where you have to wait about 5 hours...)

if you wont to debranded you need flash it with non branded soft, i think you dont need to change your soft to change start up sound.
For changing you start up sound you need to upload to

tpa//preset//system//settings

using Far manager

**semaj** · 11-14-2007

Originally Posted by Yodafone

OK, I did it, just in case I did anything wrong, I did it with my old K510.

Now I know it's CID49

Would I need to debrand it (It's Vodafone branded) to add files to it (eg. New startup sound) and what directory do I put the startup sound? And would it require bruteforce? (Where you have to wait about 5 hours...)

The default start up sound is located at:
\TPA\PRESET\SYSTEM\SETTINGS\STARTUP_SOUND_SEMC.mid

just replace it with a new midi file of your choice and rename it to STARTUP_SOUND_SEMC so thats it...

you can also use XS 3.0 (FSX) its much safe!

**debeliz** · 11-12-2007

yes ther is, start the program and you will see it.

Thread: XS++ 2.x Guide

Thread Tools

Display

Hybrid View

The Following User Says Thank You to debeliz For This Useful Post:

The Following User Says Thank You to debeliz For This Useful Post:

Thread Information

Users Browsing this Thread

Tags for this Thread

Posting Permissions