XS++ 2.x Guide

[ts013]

ricardoab: Have a look at the languages description on the main page to find out what firmware you have to flash to get your desired language.
The problem is: W200 is not supported by XS++ as far as i know. Unfortunately I'm not sure if you can use FAR or SE Tool lite, I never used that type of phone.

[vahnzenqi]

Can this tool upgrade CID49 to CID51?

[docmagoo2]

yes. put the appropriate firmware file in the main slot, and the CID will be updated

[SEpsyche]

:)hi...

how can i change the color of my phone from brown to red? which software should i use?

can i apply patches n XS++? can i change the drivers in my phone even if it is brown? what should i do to apply the drivers in my phone?

Thanks...:)

[gsmcall]

if i flash my k550 red52 with xs++ v2.2?

[djape48]

I tried to flash my w700i (originally R1DB001) with xs++, W700_R1CA021_MAIN_EU_1_CR_RED49 as main, W700_R1CA021_FS_EMEA_2_RED49 as FS, and customization w700 EMEA_2 and xs stuck at Activating filesystem. I stoped procedure after 30 minutes, and phone couldn't turn on in phone mode (configuration error...). When select music mode at startup (works normally) and enter service info/software info - it is r1ca021. How can I fix my phone? This is my first flashing, maybe I shouldn't do it :)

[darkfuture]

thank you i want to flash my k610i to w660
but how?

[ts013]

djape: Try using an older version (1.2 or 1.5)

[djape48]

Tried xs 1.5 but everytime stops here:

18:38:17| Ready for operation!
18:38:39| Starting Loader Unlock Hack...
18:38:39| ***** R3L
18:38:39| Cannot open CID36_00_R3L.bin
18:38:39| Wait for loader hello
18:38:54| ++ Error: Flashing failed
18:38:54| Disconnected... Unplug the phone
18:38:56| Shutting down...

Now I tried xs 3.0 beta and another failure:

19:03:06| Done uploading
19:03:06| Sending shutdown command to phone...
19:03:06| Customizing was SUCCESSFUL!
19:03:06|
19:03:06| Disconnect phone from USB-port and wait for
19:03:06| further instructions.
19:03:06| You have 10 seconds.
19:03:06|
19:03:16| Open the battery-cover and reinsert the battery.
19:03:16| Hold C Button on phone and connect phone again.
19:03:16| You have 30 seconds.
19:03:16|
19:03:23| Baseband ID: 8040
19:03:23| DB2010 Marita compact
19:03:23| Protocol Version: 3.1
19:03:23| Phone has restarted successfully...
19:03:23|
19:03:23| Sending db2010_cid49red_flash_r2b.bin...
19:03:23| Applet ID: 051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
19:03:23| This is a FLASH loader
19:03:23| Flashing breakinfirm\W700_R1CA021.bin
19:03:23| Header type: BABE
19:03:23| 2 flashblocks
19:03:23| Binary acknowledge failed with: 15
19:03:23| Failed
19:03:35| Error: Flashing failed
19:03:35| Disconnected... Unplug the phone
19:03:39| Shutting down...

Stupid w700

[ts013]

Please post up the log when you just connect the phone.
A log of the identifying process done with SE Tool lite would be nice too.