Problems with my SE K810i

[Murder1two]

Hi pupils,
I have a (I don't hope so) big problem. I wanted to use those flash menu in my Sony Ericsson K810i. This Mobile Phone had an T-Mobile branding and I wanted also to debrand this Firmware. Now after long time of searching the internet and with assistance of some guys of the internet I got the following files which I already used:

program:
SETool2 Lite v1.08

files:
directory:->K810_R1KG001
------------->k810_R1KG001_FS_EUROPE_2_RED52.fbn
------------->k810_R1KG001_MAIN_GENERIC_RED52.mbn
directory:->HB1-06_Gen_CDA102568_11_R8A_GENERIC_EUROPE_2
------------->zipped to file: tpa.zip

Ok how did I wanted to start the Flashing? I started SETool2 Lite v1.8 on Phone Type I choosed my K810. As Files I added the two files k810****.fbn and the k810****.mbn. I leaved the Firmaware upgrade pack empty and choose at the MISC files the tpa.zip. I also leaved the RESTORE file empty.

So I thougt it is now enough and I can start so I klicked on FLASH. Now the progam gaves me 30 seconds to hold "C" and connect my Mobile Phone.

Everything works fine and here is a log of the flashprocess:
================================================== ==========================
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35612701501027 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing C:\Dokumente und Einstellungen\Kali\Desktop\Downloads\Handy\K810_R1 KG001\k810_R1KG001_MAIN_GENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\Dokumente und Einstellungen\Kali\Desktop\Downloads\Handy\K810_R1 KG001\k810_R1KG001_FS_EUROPE_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4500
Will flash 225 blocks...
SSW loading returns:0
Elapsed:349 secs.
================================================== ==========================

So I removed for a short time the battery and put it back started my mobile phone without the sim card (the card and the stick was on the whole process not in the Phone as I read this before). The Mobile Phone works fine ... so far. I inserted the sim card and startet the Mobile Phone again and got a status bar and I thougt everthing is fine. I typed my PIN and the Mobile Phone asked me for an device code which I activated as I got the Mobile Phone. So I typed the password in but that was wrong so I typed the SE standard Code in which works fine.

And now here comes the problem :-). The Mobile Phone gives me a message, that the Configuration is wrong and I had to contact the Service-Center. So I started SETool again and klicked on Unlock/Repair and also that works fine but I still cannot use my Mobile Phone cause I got this message for an wrong Configuration what can I do now? I need help :(

[andd2007]

don't worry,that is not a big problem, you just forgot to flash the main file again.
Flash the MAIN(without FS) and if it is flashed succesfull, your phone wil work fine.

Have you heared something about finalization?(it means you have to flash the Main);)

[ts014]

maybe u zipped up ur custpack wrong extract on ur computer it should go tpa folder preset folder custom folder tpa/preset/custom

[Murder1two]

so.. just for my secureness I have just to flash the Main and not the FS again? means I put die Main File under file or under Upgrade pack? and the strukte of the tpa.zip when I open this is TPA/PRESET/CUSTOM/..... is that right? I have to put it in MISC files right? and now Flash again?

[Murder1two]

thanks alot my MP works fine :))

[Murder1two]

hey pupils

is it possible to get flash themes on the k810i? Or another model like the american K810a oder the Chinese kind K810c maybe I can't remember. Is it possible to get those themes?

[andd2007]

No , taday it is not possible. All other forums answer it is not possible or it is too difficult. The k770i supports Flash menues, but when I ve flahsed only the FS from K770i on my K800i my phone did't want to start(white screen) so I put my K800i firmware back.

I think flash themes are not so important, becouse by trying to make the flash theme work on K800/k810 you can demage yor phone.

My recomendation is: change the Icons or put .gif's on the phone through them the menu looks like flash theme.;)

[Pizzadude]

Hi, looks like what im after myself as I also have a t-mobile k810i which I want to unbrand, can you please tell me where to get the files you mentioned -
files:
directory:->K810_R1KG001
------------->k810_R1KG001_FS_EUROPE_2_RED52.fbn
------------->k810_R1KG001_MAIN_GENERIC_RED52.mbn
directory:->HB1-06_Gen_CDA102568_11_R8A_GENERIC_EUROPE_2
------------->zipped to file: tpa.zip

P.s I live in UK so can you also tell me if Europe_2 is correct ? Sorry for being so thick, im new to all this.