[k610] problem with flashing

[Murder1two]

i've got a problem, i've installed the USB-Flash-Driver and Phone-XS

i wanted to flash my k610 ... and i've downloaded 2 files

Main: K610_R1ED001_MAIN_GENERIC_RED49.rar
FS: K610_R1ED001_FS_EUROPE_2_RED49.rar

i klicked "start" than happend this

22:37:26| ++++++++++++++++++++++++++++++++++
22:37:26| Turn off phone
22:37:26| Hold C Button on phone and connect phone.
22:37:26| You have 30 seconds.
22:37:26| ++++++++++++++++++++++++++++++++++
22:37:31| PORT STATUS: ACTIVE
22:37:31| DBID: 9900 (db2020)
22:37:31| proto: 3.1
22:37:31| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K610)
22:37:31| ...using GDFS name
22:37:31| ++++++++++++++++++++++++++++++++++
22:37:31| PHONE INFO
22:37:31| ++++++++++++++++++++++++++++++++++
22:37:31| DBID: db2020
22:37:31| OPT CID: 51
22:37:31| EROM CID: 51
22:37:31| EROM color: red
22:37:31| IMEI: 35463701xxxxxx
22:37:31| Phone: K610
22:37:31| Operator: E_PLUS
22:37:31| CDA: CDA102497/33 R6A
22:37:31| Firmware: R1GB001
22:37:31| EROM: R3A016
22:37:31| ++++++++++++++++++++++++++++++++++
22:37:31| ready for operation!
22:53:13| Sorry, your phone is NOT SUPPORTED
22:53:13| Error: Cannot send flash loader
22:53:13| ++ Error: Flashing failed
22:53:15| Disconnected... Unplug the phone

wheres the problem?

[Murder1two]

comon guys ... who can help me ???? :(

[ts013]

Which XS++ version? You'll need 1.6.* in order to flash your phone.
And like I said...use Firmware matching the EROM CID --> 51

[Murder1two]

now i got the right files ... and the programm (setool lite) is flashing my phone ... now it runs more than 1 hour ... is thar normal?

[shenmin]

You cannot use CID49.

Use CID52, ur phone is not supported CID49

[cibo]

you must flash your phone with file with the same cid as is in your phone...
no CID49 but CID51!

if you want to flash CID52 firmware you will must first upgrade your phone with SEUS...

[fightrat]

Phone XS does not support cid higher than cid49! it wont work!

[bizon69]

Try SeTool lite 1.08 this software support CID51 and download proper firmware with CID51 not CID49 !!!

[cibo]

you can use XS++ 1.6.8 it supports your phone too... ;)