Acoustic for W610i

[opu_bu]

I have tried all the acoustic. zapf_v2_sunfire7 acoustic is loud but bass is not much. I recommend you to use K790 acoustic, because it's loud and bass is enough and quality sound.

Note: Don't delete all the acoustic file from your phone. Just overwrite by K790.

You can found K790 acoustic on Attachment file.

Try it and give your opinion.

Good Luck...

[Ree]

Hello, I'm very new to fiddeling with the firmware on phones. But I just bought a w610i yesterday, and the volume in the headphones is terribly low :(

Now, what software do I need to try these aucustic drivers? Are any of the guides in the guides-seciton applicable?

Thanks

[wod07]

Hello, I'm very new to fiddeling with the firmware on phones. But I just bought a w610i yesterday, and the volume in the headphones is terribly low :(

Now, what software do I need to try these aucustic drivers? Are any of the guides in the guides-seciton applicable?

Thanks

use se tool lite, u wont need a guide. Just make a new folder, and folders within like so:
Ifs>settings>acoustic>THIS IS WHERE THE FILES GO
Extract these files to "THIS IS WHERE THE FILES GO" (the acoustic folder)
Downloads - Packs - zapf_v2_sunfire7 - Top Sony Forums
Then simply zip the Ifs folder, and in se tool lite browse and add through as MISC files
THEN FLASH

[xulos]

make a folders like this in xs (that s program for flashing SE you must have version 1.6.6) location ifs/settings/acoustic and when you do that in that last folder (acoustic) put in all driver from acoustic .zip (find it on net or here w880 acoustics) !turn off the phone ,take out sim an memory and turn on xs .press connnect an then press c on mobile phone and connect it via dcu 60 .you must hold c when putting cable in.when xs recognized your phone press flash.go to settings choose breakxs an then go to fsx and press start fsx and follow directions...before all of that find usb flash drivers for w610 and install it. :D