How to convert erom from brown to red

[nilesh2312]

plz tell me how to convert erom from brown to red for w850i cid 49/51/52 using setool2
is there any tutorial ?

[mahcin]

I do:
flash MAIN and FS with on the finish CID RED

[Gump]

FAQ from the_laser:

"DB2020 procedure:
(Not mandatory, but necessary to service the phone through SERVER)

UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
next, convert phone to red.
switch to SEMC tab, select correct model and select correct conversion EROM
(example - phone is k610, conversion EROM is eroms\k610_erom_cnv_brown2red.cry )
press flash.
your phone is RED and ready to flash using credits system.

It has been confirmed that the K610 conversion EROM works for the Z610 as well. It might also work for the W850/W710."

BR
(I'm not shure if it works in lite version)

Gump

[matin-gsm]

this cant be done in setool lite 2 , setool lit 2 user's just can flash fones with diffrent cid for free of cost , can not change brown to red or unlock or etc ...

so dont test it with setool 2 lit


Regards ,

[pratyashi]

how to do it? please tell properly...

[miftahudin]

rdgfاین سیستم رو روی اون سیستم کبی کرد ؟ چون هر کلکی که زدم نشد . با تشکر
حبیب

Use English Language only and don’t spam forum Space read form rolls Carefully
Best regards,

[deaddance]

esmail-mob talk only in english or you will be banned. dont spam please...

[miftahudin]

how to convert erom from red to brown CID 49 for K310i and k510i
Br.

[paladinzluka]

It is impossible.

[miftahudin]

It is impossible.

Any other way to repair the phone with this error

v0.91380096/UNI
Card serial:000xxx10
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO VALID FLASH CID DETECTED (00)
skipping empty loader...
Can't load id loader !
Elapsed:7 secs.
Br.