easy guide for flashing by xs++

[sarej]

can i flash my k800i to k810 ?
i want the TrackID option

[xbjgod]

update service: u have the latest update so i cant flash cid 52

there are three options here.
1. use wotan, sure it will cost a few bucks
2. use w610_R1JE001_RED51 firmware
3. i think se in ur country dont renew the firmware as in my country China
i know someone try this:
flash by using K550_R1JD001_FS_APAC_RED51,
& K550_R1JD001_MAIN_CHINA_LI_RED51,
& HB1-06_Gen_CDA102568_101_R8A_GENERIC_APAC
it has english interface after ur flashing
then try updata by update service
it should have new firmware this time.
then u can use ur own firmware to flash to w610.

[xbjgod]

Hi, Great guide! I got k550 also and hoping to convert it to w610 as you did :)
I got few questions though:
1. Are these FS and MAIN files can work together?
W610_R6BC002_FS_S_ASIA_LEVAN_RED52
W610_R6BC002_MAIN_GENERIC_NA_RED52

2. Is the custpack that I need is this?
HB1-06_Gen_CDA102568_110_R8A_GENERIC_S_ASIA_LEVANor this:
HB1-06_Gen_CDA102568_5_R8A_GENERIC_S_ASIA_LEVAN(what's a difference?)

3. in the step 10 in your guide, you don't chose anywhere that custpack and w610 doesn't show on "Phone Models" scroll, so how does XS++ know which custpack to use? How to make sure that it uses the right one?

actually i'm new in flashing 2, so i'm not sure about first two questions.
1. compare among these 5 mian files
W610_R6BC002_MAIN_CHINA_NA_RED52 08-14-2007
W610_R6BC002_MAIN_GENERIC_NA_RED52 08-14-2007
W610_R6BC002_MAIN_HONG_KONG_NA_RED52 08-14-2007
W610_R6BC002_MAIN_ORANGE_NA_RED52 08-14-2007
W610_R6BC002_MAIN_TAIWAN_NA_RED52 08-14-2007
expect W610_R6BC002_MAIN_GENERIC_NA_RED52, other 4 dont
seem suit for u.
2. according to the names of these two custpack, the difference between
them is cda, different cda stands for different area. i think both of them
will work fine.

3. create a series of folders in the same folder as xs++.exe
\files_to_upload\tpa\preset\custom
put the unpack custom files in the folder "\custom"
as shown below

[xbjgod]

i'm not sure, i dont think they have the same hardware.

after i check, someone has succeeded to flash k800 to k810, but there are a few bugs.

[r0cx]

hi
thx for your posts,


i dont have the w610 cID 51 can u give me???

now i have the china firmware on my phone. SEUS says: " u have the lateste firmware"

[bahatelos]

Hi!
This may have been answered already but I cant find it anywhere so...Will flashing the phone also unlock it from the network?
Thanks!

[drgre]

Hi!
This may have been answered already but I cant find it anywhere so...Will flashing the phone also unlock it from the network?
Thanks!

It was answered many times, but you mixing two different things here:
1. Unlocking - removing simlock to specific mobile network, the answer is no, it won't.
2. Debranding - removing branded to nework settings in the phone - yes it will.
Debrand - yes, unlock - no.
For more info search the forum.

[uiop]

Can anyone tell me if it is possible to use .wtf and .wtm files for flashing with XS++?
Thanks

[cdican]

Can anyone tell me if it is possible to use .wtf and .wtm files for flashing with XS++?
Thanks

i think so , try it :p

[ts013]

No, I don't think that's possible. Wotan, DaVinci and SEKing files are encrypted so you can only use them with their clients.

But there are tools to convert those files. Jagheterfrederik's GExtract for SEKing files for example.