[SOLVED] Wally_Dogs Guide to XS++ Flashing CID 49 DB 2010 Phones [Debranding | Flash

[ad5665]

ok i flashed my k800i and i turned it on and its just been stuck at "please wait" for about 25mins now is that normal?

edit: just turned it off and put my m2 card back in and going to try again if it takes too long should i reflash but to the highest firmware cos i went to the lowest dont ask why

edit2: i have tryed to flash with the 2 newest firmwares and it just came up with this
"Sending flashfile D:\Documents and Settings\adz\Desktop\K800_R1KG001_MAIN_GENERIC_WI_ RED52\K800_R1KG001_MAIN_GENERIC_WI_RED52.mbn
15:39:01| 460 flashblocks
15:39:01| Binary acknowledge failed with: 89
15:39:01| Failed
15:39:01| Binary acknowledge failed with: 68
15:39:01| Failed sending datachunk
15:39:01| Failed sending flashblock 1. Returnvalue 0x17F0008
15:39:01| Finishing flash
15:39:01| Binary acknowledge failed with: 02
15:39:01| Failed
15:39:01| Failed
15:39:11| ++ Error: Flashing failed
15:39:11| Disconnected... Unplug the phone
15:39:11| Shutting down..."
but it is flashing with the old one still so im doing it again then going to leave my phonw for a few hours