Latest firmware is R1DB001.
Flash only with that firmware.
Regards!
Latest firmware is R1DB001.
Flash only with that firmware.
Regards!
@phil... which version of XS++ you using?
I converted my k750 CID49 to w800 today using XS++ v1.5 and i had sort of a similar problem but only the flash was going through but then it would freeze at "finishing flash", what i did was first flash the w800 Main firmware and when it gets to finishing flash i left it there for a few minutes to ensure it had completed the flash of Main, then i had 2 flash FS without customizing, and once again it froze at "finishing flash" so i left it for a few minutes to ensure it had finished flashing the FS and then hit close, then i had to start up XS again for a 3rd time to customize (this part went smooth), but all in all it done a great job on my 1 hour old phone hehe still has a total call time of "0"...
PS: Make sure your using the correct files, if its a CID49 you will need to run them through GSlide first which can be found here in the download section ;)
I also had to customize using the "own_custpack" when ever i chose the custpack for europe 2 thats built into XS++ windows xp spit out an error saying XS encountered an unexpected error and need to shut down, but custpack also found in the download section :)
If your phone is CID36 i surgest you use "GFlash" as its alot easier to flash a CID36 and can all be done in one stage ;) stick in your MAIN+FS choose your CDA and hit flash and 10 minutes later you'll have your converted phone, but GFlash is CID36 ONLY...
There are currently 1 users browsing this thread. (0 members and 1 guests)