flash needed formy SE902 cell phone

[satch1234]

If you used correct files then there is hardware problem with your phone,probably lcd or water damaged phone,so take it to some private repair shop.

EDIT: did you try to flash with generic AS firmware,if you didn't please try and post result.

[phyniace]

final y my phone has been flashed with setools files
and it works properly
the main problem was the firmware version i was using seuse flash files with setools and it dosn'nt work .

2- aftre flashing phone i have waite my be 2h for the phone has started again
thankx for all of you for your support

[satch1234]

Thanks for the report and good luck.

[phyniace]

hi guys
for flashing the SE C902 here is the steps

1-use the correcte firmware
2- the flash process should be done one by one means that you never use the complet package on one steps
a- flash with MBN file
b- flash with Fbn file
c- flash with customs file
3-remove a battery waite 1mn then put it a gain and press on you will have a message (please waite )about 15mn then the phone restart . and now every thing is ok you can use your phone

aftre 16days looking for a solution for my phone i found this is the best way .

thanks for all