Problems after flashing SE W980 with a2uploader

[pet80]

Hi there,
i flashed my se w980 with a2uploader and everything was fine till i disconnected after saying it's ready. I then tried to connect again to put the custom file, but doesn't want to connect. Tried with omnius and xs++ as well, but no luck. When disconnect the phone from a2uploader it shoes following message:
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed:15 secs.
Will really appreciate if someone can help...

[elmerare]

hello, follow the steps in the following guide A2-DB3150 Flashing , remember to have the battery fully charged, and that all connections both the phone and the PC are in good condition and working, Greetings.

[pet80]

thanks for replying, but I already flashed my w980 using the method in that post, but when tried to put the custom files( so disconnecting and re-connecting again holding C) nothing happened. It does NOT detect the phone. Tried with XS++ and Omnius but no luck.

[elmerare]

test pressing 2 +5 keys and not the "c"

[riders4sia]

try flashing all the MAIN, FS and custom files at once

[pet80]

try flashing all the MAIN, FS and custom files at once

Ok, will try tomorrow.
could you just tell me if those are good for w980:

W980_R3CA038_FS_CENTRAL-EUROPE_RED52.fbn
W980_R3DA028_MAIN_GENERIC_MD_RED52.mbn
C510_Ray_Custom_C702-C902-C905-G705-T700-W508-W595-W705-W760-W902-W980 - custom files

[elmerare]

Ok, will try tomorrow.
could you just tell me if those are good for w980:

W980_R3CA038_FS_CENTRAL-EUROPE_RED52.fbn
W980_R3DA028_MAIN_GENERIC_MD_RED52.mbn
C510_Ray_Custom_C702-C902-C905-G705-T700-W508-W595-W705-W760-W902-W980 - custom files

just download another custom of here Downloads - w980custpack - Top Sony