Problem with w800i

[khalid]

When i'm starting a flashing my phone the programm (X++) says that IMEI name does not match GDFS name. How can i make IMEI matching GDFS name??

[paladinzluka]

khalid It is normal. Program doesn't properly work and cann't read gdfs area.

[mirciu]

i tried today to flash my k750 to w800 and i had no problems, afterwards i took the brandly flashed w800 back to k750 for its latest firmware and had no probs at all

[ahmed_max001]

hii all
i hope you use far maneger

[Alvi84]

Why far? It can be done with xs++ too.

[mille87]

good luck with your flashing

[k750dh]

xs++ is the best program to use for this imo.. far is good if you want to do some tweaks but otherwise try to standardize the build with xs++

[miroalex]

The thing is that IMEI of phone stored in 2 parts,first OTP that is one time programmable chip and second GDFS when you flash your phone you change your gdfs but not your OTP!
for example you have K750 with IMEI xxxxxx when you flash it with w800 firmware it doesn't change bu in XS++ it will say that IMEI and gdfs name does not match because you have to IMEI that belongs to K750 but GDFS that is w800.

[Robal]

The thing is that IMEI of phone stored in 2 parts,first OTP that is one time programmable chip and second GDFS when you flash your phone you change your gdfs but not your OTP!
for example you have K750 with IMEI xxxxxx when you flash it with w800 firmware it doesn't change bu in XS++ it will say that IMEI and gdfs name does not match because you have to IMEI that belongs to K750 but GDFS that is w800.

Shortly: IMEI changes NOT after flashing.