W810 problem flashing breakin loader

[zzzn00bzzz]

make sure you have the latest SEFP. And check what cable you use. DCU-60 or service! make sure it's set right. You can try to use SEMC 8.4, it worked for me.

[kram]

Hi,

thanx for reply

yes, it's a T-mobile branded phone

xs++ 1.2 had the same results

perhaps you're right an did correct braekin-flashing and the problem is FAR-related.

Here's what happended in FAR

• set up FAR copying sepf44 & sepf51 doing den_po's patch afterwards.
• started far
• W300_W810_...
• Enter the matrix
• far told me to connect the w810 pressing c
• connected w810 via USB
• Folder MAIN/FS appear in left window
• clicking FS
• SE Flash pluging window appears: Command pprogress 1
• NOTHING HAPPENS and Far freezes :confused:

Any further idea ???

[mourad_ada]

Hi,

thanx for reply

yes, it's a T-mobile branded phone

xs++ 1.2 had the same results

perhaps you're right an did correct braekin-flashing and the problem is FAR-related.

Here's what happended in FAR

• set up FAR copying sepf44 & sepf51 doing den_po's patch afterwards.
• started far
• W300_W810_...
• Enter the matrix
• far told me to connect the w810 pressing c
• connected w810 via USB
• Folder MAIN/FS appear in left window
• clicking FS
• SE Flash pluging window appears: Command pprogress 1
• NOTHING HAPPENS and Far freezes :confused:

Any further idea ???

It's really worth trying why not ...just get to C:\Program Files\Far\Plugins\SEFP double-click on sefp0.10.0.51patch

and click on "UNDOT IT!" ...that would restore the original sefp.dll ..

and try once again connecting ur PHONE THRU FARMANAGER..

THAT WOULD WORK BUT NOT GARANTEED ...JUST Tested ON K310 and truly passed !!

Hopefully you manage to break into ur phone FILE SYSTEM !

Best Regards .

Mourad