W810 problem flashing breakin loader

[kram]

Hi,

i 've tried to flash den_po's breakin loader using xs++v15 in order to
do debranding.

After it said "finishing flash" nothing happened.
I hit "stop" as posted in the tutorials and it said "++Error flashing failed".:confused:
Then I disconnected the phone.

Afterwards it wasn't either possible to access the FS with Far170, or to switch on the phone.:eek:

Fortunately it was possible to restore the original MAIN via SEUS and the
phone is working again.:cool:

What did I wrong.
Please help a newbi ;)

Thanks

kram

LOG:
23:38:24| XS++ v1.5 Ready !
23:38:46| Attempting to open the interface...
23:38:46|
23:38:46| Turn off phone
23:38:46| Hold C Button on phone and connect phone.
23:38:46| You have 30 seconds.
23:38:46|
23:38:53| PORT STATUS: ACTIVE
23:38:54| Baseband ID: 8040
23:38:54| Hardware Platform: db2010 Marita compact
23:38:54| Protocol Version: 3.1
23:38:54| AutoReturnCollectingSending loaders\db2010_cid00_prodid_p3k.bin...
23:38:54| This is a PRODUCTION_ID loader
23:38:54| ***** Read flash vendor & id (cmd 0D)
23:38:54| ***** Read otp (cmd 24)
23:38:54| Activating GDFS...
23:38:55| phone name detected
23:38:55| Return
23:38:55| PHONE INFO
23:38:55| DBID: db2010
23:38:55| OTP CID: 49
23:38:55| EROM CID: 49
23:38:55| EROM color: Red
23:38:55| IMEI: 35906400xxxxxx
23:38:55| Phone: W810
23:38:55| Operator: T_MOB_INT_A
23:38:55| CDA: CDA102494/55 R8A
23:38:55| Firmware: R4DB005
23:38:55| EROM: n/a
23:38:55|
23:38:55| Ready for operation!
23:39:31| Sending loaders\db2010_cid49red_flash_r2a003.bin...
23:39:31| This is a FLASH loader
23:39:31| ***** Read flash vendor & id (cmd 0D)
23:39:31| ***** Read otp (cmd 24)
23:39:31| +++ Now flashing firmware main...
23:39:31| Sending flashfile D:\Download\handy\far kram\db2010cid49_4_alpha\w810_p3k_dcu.49R.ssw
23:39:31| 5 flashblocks
23:39:33| Finishing flash
23:39:51| ++ Error: Flashing failed
23:39:51| Disconnected... Unplug the phone
23:44:57| Shutting down...