I tryed to upgrade my phone erom and nothin was upgraded :(
look at this log file
i'm doing something wrong? ...Code:++++++++++++++++++++++++++++++++++ 15:59:57| Turn off phone 15:59:57| Hold C Button on phone and connect phone. 15:59:57| You have 30 seconds. 15:59:57| ++++++++++++++++++++++++++++++++++ 15:59:57| PORT STATUS: ACTIVE 15:59:57| DBID: 9900 (db2020) 15:59:57| proto: 3.1 15:59:57| phone name detected 15:59:57| ++++++++++++++++++++++++++++++++++ 15:59:57| PHONE INFO 15:59:57| ++++++++++++++++++++++++++++++++++ 15:59:57| DBID: db2020 15:59:57| OPT CID: 49 15:59:57| EROM CID: 49 15:59:57| EROM color: red 15:59:57| IMEI: %%%%%%xxxxxx 15:59:57| Phone: K800 15:59:57| Operator: EUROPE_1 15:59:57| CDA: CDA102511/16 R5A 15:59:57| Firmware: R1GB001 15:59:57| EROM: R3A016 15:59:57| ++++++++++++++++++++++++++++++++++ 15:59:57| ready for operation! 16:00:31| Shutting down... 16:00:51| sending loaders\db2020_cid01_cert_p3g.bin 16:00:51| QH00 Header 16:00:51| Wait for EsB 16:00:51| Wait for EhM 16:00:51| QA00 Prologue 7524 bytes 16:00:51| Wait for EaTEbS 16:00:51| QD00 Payload 52566 bytes 16:00:51| Wait for EdQ 16:00:51| This is a CERT loader 16:00:51| binary sending loaders\db2020_cid49red_flash_r2a001.bin 16:00:51| Header 16:00:51| Prologue 7484 bytes 16:00:51| Payload 46073 bytes 16:00:51| This is a FLASH loader 16:00:51| +++ Now flashing firmware main... 16:00:51| Sending flashfile D:\desktop\k800i\erom\K800_RED_CID49_EROM_R3B019.bin 16:00:51| 4 flashblocks 16:00:53| Finishing flash 16:00:53| Done flashing 16:00:53| ++ Flashing was successful 16:02:13| +++ Sendinging shutdown signal to phone... 16:02:13| +++ Done.. You may now connect again... 16:02:13| Shutting down...