db2010 cid49 with SEFP

[Top Sony]

someone still don't know...
it's just copypasted from the original theme @ se-nse
________________________________________
this is a small, tiny new year gift =)
the attached archive contains:
/SEFP - place all files from this folder into the same folders in the far\plugins\sefp.
*_dcu.49r.ssw - breakin-loader - you should flash this file as main BEFORE using far_manager with any flasher that can flash cid49 (phone_xs, davinci client).
/REST - files for firmware restoring. you should flash one of these files (according your phone's firmware version) with far AFTER using far_manager.

check your phone's firmware version BEFORE flashing *_dcu.ssw.
if it does not work, just reflash main.

here is the "brown" version. it's for FS only, but it work without flashing of breaking-loaders. thanks to afghanjohnny for the loaders

- v4 alpha
w300/w810/z550 partial support added. now only FS works, because this phones (at least w810) has an other flash chip type.

- v3.3
use only with sefp v0.10.0.51 (http://sephone.nm.ru/tools/)
now with any erom
w550: breakin-loader from version 3.0

- v3.2
ssw's recalculated
added w550. attention! do not try to use v3.2 with w550 until i check the cause of death phones. use v3.0 instead, flash w550_r2e_dcu.49r.ssw using davinci client, not phonexs/phonexc.

- v2
now FS works

- v1
first version. only FLASH, k750


minifaq:
- please don't wait for db2020 support
- if sefp or some flasher doesn't recognize your phone, reinsert battery and try again
- if sefp says "Error while readCID", install plugin properlу (http://sephone.nm.ru/tools/SEFP010044.zip and then http://sephone.nm.ru/tools/sefp010051.rar over it)
- if sefp says "<BIldr> can be used with <b><a href="http://www.topsony.com/foro/showthread.php?t=455"><b><a href="http://www.topsony.com/foro/showthread.php?t=455">Service Cable</a></b></a></b> ONLY", you should patch sefp.dll (sefp0.10.0.51patch.exe inside db2010cid49_*.rar)
- if sefp hangs on "Sending RAW file: cid49run: sent 1 byte(s)", and sefp.log contains
0010 << 42 49 4E 4E 00 80 00 00 48 04 00 00 01 80 00 00
0001 << 52
Waiting for loader hello:
Wait for 89 answer:
0005 >> TIMED OUT!
0005 >> TIMED OUT!
install last cid49addon (db2010cid49_*.rar)
- write rest file only using sefp
- if your phone starts when you trying sefp, you forgot to flash brekin loader (ssw)
- a phone would not work after flashing brekin until you flash rest or main

db2010cid49brown.rar
db2010cid49_4_alpha.rar