k800i Flashing White Screen!

[AlexRussell]

My phone vibrates when I turn it on, then goes white screen then black, then white then black, and so on, I can't turn it on unless I remove the battery.
Please help me!
What firmwares you recommend me?
Thank you!

Identify log:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35570401478243 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:K800i
Brand:Tele2
MAPP CXC article: R1JC002     prgCXC1250210_GENERIC_WI
MAPP CXC version: R1JC002
Language Package:CENT_EUROPE
CDA article: CDA102511/101
CDA version: R1A
Default article: cxc1250490
Default version: R1JC002
 
Operator: 000-00
 
Elapsed:8 secs.

[riders4sia]

use the latest R8BF003 -
MAIN : K800_R8BF003_MAIN_GENERIC_WI_RED52
FS : K800_R8BF003_FS_CENT_EUROPE_RED52
custpack : HB1-06_Gen_CDA102568_2_R8A_GENERIC_CENT_EUROPE
you'll find the above files in the download area

[AlexRussell]

use the latest R8BF003 -
MAIN : K800_R8BF003_MAIN_GENERIC_WI_RED52
FS : K800_R8BF003_FS_CENT_EUROPE_RED52
custpack : HB1-06_Gen_CDA102568_2_R8A_GENERIC_CENT_EUROPE
you'll find the above files in the download area

What tool should I use? XS++?
And how to mount the custom pack?

It might be because of the battery?
It has the white bar on the top of the battery red...its not white anymore, it might be the battery broken?
Thanks.

[boysie]

Battery is water damaged. Obviously phone could be water damaged too.

[riders4sia]

setool lite work do the job

[AlexRussell]

Up!

Still having problems, still white screen, any other k800i CID 52 firmware?
Thanks!

[satch1234]

If it is not water damaged and flashing not help then i think it's display problem.Try to replace it,i had the same problem on few k800 and after i replaced display all was fine.

[AlexRussell]

I don't think it's the display, because it's goes white and black, white and black (means damaged EROM & GDFS) and it vibrates one time when I turn it on, tried different firmwares, without luck.
Might be the EROM totally damaged cause I tried flashing many firmwares?
The phone never fall on ground or anywhere.
Help...

[AlexRussell]

Sorry for double posting!

The phone is detected as k700 with SeTool.
It means it's dead forever?

[satch1234]

I told you that i had the same problem on few k800 and it was also detected as k700 so if you can try to replace display.I service phones about 7 years and it was always display problem.Don't touch gdfs or you will make more damage,take the phone to some private repair shop and ask him about your problem i think he will tell you that display is damaged,you have nothing to loose if you ask.
Post result.