W580i reads as K700

[rapidroll]

@Gigman,
on your first post : It actually came on but would not go past the Se startup screen.
then it should work on your mobile.
press >*<<*<* button on your w580.
go to Service info -> Model info and check out the Software info too.

or identify your w580 phone by XS++ v3.1 and post the log.

[Gigman]

21:43:54| XS++ v3.1 (Darwin) Ready !
21:44:03|
21:44:03| Attempting to open the interface...
21:44:03|
21:44:03| TURN OFF PHONE!
21:44:03| Hold 'C' button on phone and connect phone NOW.
21:44:03| You have 30 seconds...
21:44:03|
21:44:09| Baseband ID: 9900
21:44:09| Protocol Version: 3.1
21:44:09| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K700)
21:44:09| ...using GDFS name
21:44:09|
21:44:09| Profiling SEMC phone...
21:44:09| Platform: DB2020
21:44:09| OTP CID: 51
21:44:09| EROM CID: 53
21:44:09| EROM Color: Red
21:44:09| IMEI: 01127100xxxxxx
21:44:09| Phone ID: K700
21:44:09| Region: AMERICA_1
21:44:09| CDA: CDA102568/107 R8A
21:44:09| Firmware Version: R8BE001
21:44:09| EROM: R3A022
21:44:09| Ready for operation!


Takes Main, FS, and Custpack but will not get past this screen at all. I tried >*<<*<* but which one is the arrow. I used the round button up^ down left< right> and got nothing.
2011-10-13 21.42.38.jpg