The identification now work, showing the following log...

Code:
Action journal
21:54:43   Identify
21:54:43   Shows detailed information about the connected phone.
21:54:43   Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 64-bit
21:54:43   Application version: 0.15.2648 (beta)
21:54:43 . The action name is 'Identification'
21:54:43   Selected phone type: K800
21:54:43   Selected connection method: USB EROM
21:54:43 i Instructions
21:54:43 i 1. Make sure the phone battery is charged to at least 50%.
21:54:43 i 2. Switch off the phone!
21:54:43 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
21:54:43 i 4. Press and hold the button C, then connect the cable to the phone!
21:54:43 . The action started waiting for the user
21:55:01 . The action finished waiting for the user
21:55:01   Connecting via Generic EMP USB Flash Device (USB3)...
21:55:01   Device driver version: 2.2.0.5
21:55:01   Entering baseband CPU service mode...
21:55:01   Detected chipset: DB2020 '9900
21:55:01   Boot mode: ROM
21:55:01   Sending loader...
21:55:01   Waiting for loader response...
21:55:01   Flash chip manufacturer: Intel®
21:55:01   Flash chip ID: 897E
21:55:02   IMEI: 35399601661996
21:55:02   OTP CID: 49
21:55:02   OTP area status: Locked
21:55:02   Product type: Retail
21:55:02   Effective CID: 49
21:55:02   Effective color: Brown
21:55:02   Initializing GDFS access...
21:55:02 e Error: GDFS configuration not found.
21:55:02   Turning off the phone...
21:55:02 i Please disconnect battery and cable from the phone!
21:55:02 s Successfully done.
21:55:02 . The action entered shutdown phase
21:55:02 . The action reported success

Additional details
---
72 0D 06 FE 59 15 DB BA A3 DE F1 4A 8F CC FD F2 
BB A8 E7 C3 D9 C4 2B D8 2D 21 A1 DA 41 BC A7 3A 
45 C4 07 DE 57 42 7B 66 FD 14 46 1B 28 DF 
---