Results 1 to 4 of 4
  1. #1
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    K800 dead after tried unlocking

    Hi!

    I have a K800 that is "dead" after flashing with X++. I want to unlock it using Omnius. The phone does not start at all, nor is it possible to identify it using Omnius, X++ or a2uploader. The battery has been fully charged on another phone, and I finally managed to get some information from Omnius by pressing 2+5 instead of C. The log look like this...

    Code:
    Action journal
    21:17:23   Identify
    21:17:23   Shows detailed information about the connected phone.
    21:17:23   Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 64-bit
    21:17:23   Application version: 0.15.2648 (beta)
    21:17:23 . The action name is 'Identification'
    21:17:23   Selected phone type: K800
    21:17:23   Selected connection method: USB EROM
    21:17:23 i Instructions
    21:17:23 i 1. Make sure the phone battery is charged to at least 50%.
    21:17:23 i 2. Switch off the phone!
    21:17:23 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    21:17:23 i 4. Press and hold the button C, then connect the cable to the phone!
    21:17:23 . The action started waiting for the user
    21:17:54 . The action finished waiting for the user
    21:17:54   Connecting via Generic EMP USB Flash Device (USB3)...
    21:17:54   Device driver version: 2.2.0.5
    21:17:59 e Error: Failed to start communication
    21:17:59 . The action entered shutdown phase
    21:17:59 . The action reported failure
    
    Error code
    # 66BE26A12AF80238
    
    Error details
    ---
    42 09 70 CB 56 E6 C2 C9 EC 6B 06 08 90 DE 0A 0A 
    04 BB 9C E4 18 89 AE 93 05 91 91 56 CE 0C 9A FF 
    04 01 A7 AF D3 7C 1E 69 0C C1 C5 BE B0 6F 78 CE 
    14 9D EE AF 1D 31 37 E8 4A 6A B6 8D 40 4B C3 8C 
    41 22 2C 94 B8 99 02 FD 57 13 D0 8C 7E 30 B6 8F 
    34 F3 F2 BB A8 49 92 27 C4 2B 84 7E E0 A1 DA B1 
    BC 52 62 15 68 07 D4 F1 1A 29 9A 03 F0 A1 96 11 
    AC 59 39 96 4F 22 
    ---
    I have tried 3 USB-cables and also tried with another fully charged battery without success. Can anyone identify the problem and suggest a solution on how to bring it back to life?

  2. #2
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: K800 dead after tried unlocking

    I managed to start the unlocking process, and it stops showing the following log...

    Code:
    Action journal
    21:50:14   Unlock network lock by reset
    21:50:14   Unlocks the phone network lock by reset (up to OTP CID 53).
    21:50:15   Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 64-bit
    21:50:15   Application version: 0.15.2648 (beta)
    21:50:15 . The action name is 'Unlock'
    21:50:15   Selected phone type: K800
    21:50:15   Selected connection method: USB ROM
    21:50:15 i Instructions
    21:50:15 i 1. Make sure the phone battery is charged to at least 50%.
    21:50:15 i 2. Switch off the phone!
    21:50:15 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    21:50:15 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    21:50:15 . The action started waiting for the user
    21:51:20 . The action finished waiting for the user
    21:51:20   Connecting via Generic EMP USB Flash Device (USB3)...
    21:51:20   Device driver version: 2.2.0.5
    21:51:20   Entering baseband CPU service mode...
    21:51:20   Detected chipset: DB2020 '9900
    21:51:20   Boot mode: ROM
    21:51:20   Sending loader...
    21:51:20   Waiting for loader response...
    21:51:20   Flash chip manufacturer: Intel®
    21:51:20   Flash chip ID: 897E
    21:51:20   IMEI: 35399601661996
    21:51:20   OTP CID: 49
    21:51:21   OTP area status: Locked
    21:51:21   Product type: Retail
    21:51:21   Effective CID: 49
    21:51:21   Effective color: Brown
    21:51:21   Restarting the phone...
    21:51:23 i Instructions
    21:51:23 i 1. Make sure the phone battery is charged to at least 50%.
    21:51:23 i 2. Switch off the phone!
    21:51:23 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    21:51:23 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    21:52:02   Connecting via Generic EMP USB Flash Device (USB3)...
    21:52:02   Device driver version: 2.2.0.5
    21:52:02   Entering baseband CPU service mode...
    21:52:02   Detected chipset: DB2020 '9900
    21:52:02   Boot mode: ROM
    21:52:02   Sending loader...
    21:52:02   Waiting for loader response...
    21:52:03   Waiting for loader response...
    21:52:18 e Failed!
    21:52:18 . The action entered shutdown phase
    21:52:18 . The action reported failure
    
    Error code
    # 53A06C95A178992D
    
    Error details
    ---
    14 FD 79 39 4C A8 0C 3B DA 4D 50 7A D6 E5 EC 71 
    61 6E 96 08 8E C7 1C 7F E1 93 64 9E 14 40 DC B3 
    7E 7F 93 90 6C D8 82 3A 46 5D D0 FB B4 3A 38 94 
    A0 5A A8 B7 6E 2D 3F 39 DC A7 8E BE DA 41 44 59 
    29 49 A3 67 8C 48 4C 85 9A F7 FF 3D 2A E8 02 9C 
    D2 E5 88 A7 B2 87 5C CB F6 CD 00 FF A8 4C 64 0D 
    BE BB 88 A6 42 B7 94 E5 8C C5 BE 1D 8A B1 74 B3 
    B2 7B 98 F3 C8 99 BA 2E 
    ---

  3. #3
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: K800 dead after tried unlocking

    The identification now work, showing the following log...

    Code:
    Action journal
    21:54:43   Identify
    21:54:43   Shows detailed information about the connected phone.
    21:54:43   Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 64-bit
    21:54:43   Application version: 0.15.2648 (beta)
    21:54:43 . The action name is 'Identification'
    21:54:43   Selected phone type: K800
    21:54:43   Selected connection method: USB EROM
    21:54:43 i Instructions
    21:54:43 i 1. Make sure the phone battery is charged to at least 50%.
    21:54:43 i 2. Switch off the phone!
    21:54:43 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    21:54:43 i 4. Press and hold the button C, then connect the cable to the phone!
    21:54:43 . The action started waiting for the user
    21:55:01 . The action finished waiting for the user
    21:55:01   Connecting via Generic EMP USB Flash Device (USB3)...
    21:55:01   Device driver version: 2.2.0.5
    21:55:01   Entering baseband CPU service mode...
    21:55:01   Detected chipset: DB2020 '9900
    21:55:01   Boot mode: ROM
    21:55:01   Sending loader...
    21:55:01   Waiting for loader response...
    21:55:01   Flash chip manufacturer: Intel®
    21:55:01   Flash chip ID: 897E
    21:55:02   IMEI: 35399601661996
    21:55:02   OTP CID: 49
    21:55:02   OTP area status: Locked
    21:55:02   Product type: Retail
    21:55:02   Effective CID: 49
    21:55:02   Effective color: Brown
    21:55:02   Initializing GDFS access...
    21:55:02 e Error: GDFS configuration not found.
    21:55:02   Turning off the phone...
    21:55:02 i Please disconnect battery and cable from the phone!
    21:55:02 s Successfully done.
    21:55:02 . The action entered shutdown phase
    21:55:02 . The action reported success
    
    Additional details
    ---
    72 0D 06 FE 59 15 DB BA A3 DE F1 4A 8F CC FD F2 
    BB A8 E7 C3 D9 C4 2B D8 2D 21 A1 DA 41 BC A7 3A 
    45 C4 07 DE 57 42 7B 66 FD 14 46 1B 28 DF 
    ---

  4. #4
    Top Team Gold senter's Avatar
    Join Date
    Nov 2007
    Device
    W705
    Posts
    1,958
    Thanks
    2
    Thanked 344 Times in 283 Posts

    Re: K800 dead after tried unlocking

    You must repair GDFS if you have GDFS backup.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •