K770i Debranding, flash help.

[Joe1989]

Hi all, I have been trying to flash my K770i to deband it from tesco mobile in order to use vodaphoine simcard while my other phone is away getting fixed, however im struggling to get it compleated correclty

I have followed the jdflash tut on here witch has been very helpful. Using these files:

K770_R8BC004_MAIN_GENERIC_VI_RED53
K770_R8BC004_FS_EUROPE_2_RED53
HB1-06_Gen_CDA102568_11_R8A_GENERIC_EUROPE_2

Here are the xs ++ Detials for the phone:
17:40:58| You have 30 seconds...
17:40:58|
17:41:03| Baseband ID: 9900
17:41:03| Protocol Version: 3.1
17:41:03| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K770)
17:41:03| ...using GDFS name
17:41:03|
17:41:03| Profiling SEMC phone...
17:41:03| Platform: DB2020
17:41:03| OTP CID: 51
17:41:03| EROM CID: 53
17:41:03| EROM Color: Red
17:41:03| IMEI: 35238402xxxxxx
17:41:03| Phone ID: K770
17:41:03| Region: EUROPE_2
17:41:03| CDA: 1212-4527 R1A
17:41:03| Firmware Version: R8BC004
17:41:03| EROM: R3A022
17:41:03| Ready for operation!

Im not sure what else i can try, I'v try europe 2 (Im in the uk so i think this is correct) and searching for answers but im not really getting anywhere.

I flashed bot the Main and FS to osflash using jdflash witch compleates successfully, take out the battery and logback in using jdflash and on to os and put on the above confiugration, When i then take out the battery again and turn the phone on the phone says invalid sim still within the vodafone, and the tesco one says configuration error.


Any help would be awasome

thanks

Joe.

[senter]

You must unlock your phone, read here: Patching CID53 (DB2020)DB2010,2012

[2010]

Hi,
I see the same adventure with my K800i , you must have the tesco's sim : you can restart your phone with it ( now it's locked )
Good luck

[josephp07]

my XS++ say : 00:52:13| XS++ v3.1 (Darwin) Ready !

00:52:13| Executed on Microsoft Windows XP

00:52:19|

00:52:19| Attempting to open the interface...

00:52:19|

00:52:19| TURN OFF PHONE!

00:52:19| Hold 'C' button on phone and connect phone NOW.

00:52:19| You have 30 seconds...

00:52:19|

00:52:49| Error: Cannot open phone communication port

00:52:51| Disconnected... Unplug the phone

00:52:59| Shutting down...

00:55:05| XS++ v3.1 (Darwin) Ready !

WHY?hely me pls..

[riders4sia]

@josephp07
what was your phone condition/problem? Please follow correct procedure and post reply