K530 patch to remove Recording Beep

[ElectroKId]

did you check "Bypass db2020 security" in SETool ?

[nongeekyone]

Hi, thanks for the suggestion ElectroKid.

I believe I have followed the steps correctly. In fact I have flashed my phone over 15 times just trying to get this working.

Still getting "Some patch values differs. continue?" message if applying Record Beep patch after having applied the unlocking patch. Seems patches dont like each other

Next thing to try: permanent patching with Omnius, CodePawn CXC Patcher, as they allow applying 2 patches at the same time...

@ElectroKid: had you applied an unlocking patch before applying that Record Beep patch?
Have you tried to call yourself to check if the beep can be heard when you start recording?
I need to know this actually works before getting even more crazy at it :D

Maybe the patch code varies for different types of firmwares. Mine is not the generic one, so I upload it just in case. K530_R8BB001_MAIN_CN_NC_RED52.mbn
(Although i tried with a generic R6BC002 Cid52 with no success either)

My gf has a SE z610i, with firmare R1KH001 cid52. I would love to try on that phone also. maybe it's easier

[ElectroKId]

@nongeekyone

Following is what I did with my K530 (in this order):

1) I've first created a quick-access patch: drag your MAIN file (.mbn) onto [SETool2 Lite v1.11 folder]\qamaker\qamaker.exe.
put generated .VKP in MISC EDIT of setool2 lite software.
check ONLY "bypass db2020 security"
add to firmware area %your_firmare_version.ssw%
press FLASH
(note: read further details in the qamaker folder and at the forum...process should take ~10minutes to complete)

-you do this once and from now on you can quickly apply whatever patches you find for that phone (no need to use firmware again)
-just check only the option: Use "quick access" patch in SETool (LITE edition 1.11)

2) applied the 'remove SIM-Lock' patch
3) 'Beep' patch -- I know it works cos I don't hear the beep/s anymore
4) 'radio w/o headset' patch

for 2,3,4 you put the .vkp file in MISC and press Write SCRIPT (not FLASH!).

*Make sure you remove the battery when asked to and you'll be fine.

[senter]

Hi, thanks for the suggestion ElectroKid.

I believe I have followed the steps correctly. In fact I have flashed my phone over 15 times just trying to get this working.

Still getting "Some patch values differs. continue?" message if applying Record Beep patch after having applied the unlocking patch. Seems patches dont like each other

Next thing to try: permanent patching with Omnius, CodePawn CXC Patcher, as they allow applying 2 patches at the same time...

@ElectroKid: had you applied an unlocking patch before applying that Record Beep patch?
Have you tried to call yourself to check if the beep can be heard when you start recording?
I need to know this actually works before getting even more crazy at it :D

Maybe the patch code varies for different types of firmwares. Mine is not the generic one, so I upload it just in case. K530_R8BB001_MAIN_CN_NC_RED52.mbn
(Although i tried with a generic R6BC002 Cid52 with no success either)

My gf has a SE z610i, with firmare R1KH001 cid52. I would love to try on that phone also. maybe it's easier

Now you want "Remove voicerecoreder" beep for K530_R8BB001_MAIN_CN_NC_RED52.mbn version?

[nongeekyone]

Thanks for that thorough and explanatory reply.

I was following that steps. After applying the QuickAccess patch, if i apply the simlock patch, then I will get the "Some patch values differs. continue?" message and it wont work, if i only apply the Record Beep patch, I dont get the message but still can hear the beep at the recording start.

Gonna try more with R6BC002

@ElectroKid: It is great that you confirmed that it works. Now, whether it works here or this phone will run outa flashing live times and die

[nongeekyone]

@Senter: For some reason I did not see your last reply until now.
I have always tried your second patch (for R8BB001) to work with that firmware..
Does your question mean that the R8BB001 patch will not work with that specific R8BB001 firmware I uploaded?

Must admit that i am getting quite frustrated not getting this to work.
I'd like to try luck with a SE z610 with firmware R1KH001 RED52. Could you please provide the patch?

Thanks again

[senter]

@Senter: For some reason I did not see your last reply until now.
I have always tried your second patch (for R8BB001) to work with that firmware..
Does your question mean that the R8BB001 patch will not work with that specific R8BB001 firmware I uploaded?

Must admit that i am getting quite frustrated not getting this to work.
I'd like to try luck with a SE z610 with firmware R1KH001 RED52. Could you please provide the patch?

Thanks again

I port patch for Generic version, I asked which version you want to be for K530?

Z610 R1KH001 RED52 are several versions:

Z610_R1KH001_MAIN_CHINA_MY_RED52
Z610_R1KH001_MAIN_GENERIC_2_MY_RED52
Z610_R1KH001_MAIN_GENERIC_MY_RED52
Z610_R1KH001_MAIN_HUTCHISON_MY_RED52
Z610_R1KH001_MAIN_TAIWAN_MY_RED52
Z610_R1KH001_MAIN_YOIGO_MY_RED52

Tell me exactly what version is your Z610 R1KH001 CID52 ?

[nongeekyone]

wow, so the patch depends on the version of the firmware file... that explains why it didnt work on this phone.

the z610i firmware is the first listed one. Z610_R1KH001_MAIN_CHINA_MY_RED52
cant wait to try it

Thanx Senter

bump

possible to patch?