Flashing w595

[imperius]

hi, my w595 wouldnt start so i decided to flash it using omnius .
Anyone can tell me what to do, my phone is not working at all! Please check whether i have used the right files. Even the SEUS isnt working it says the software is upto dare.Please tell me exactly what to do as im a novice in this field. Thank yOU for aal your help. Imperius

Identify log:

Action journal
19:01:12   Identify
19:01:12   Shows detailed information about the connected phone.
19:01:12   Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 32-bit
19:01:12   Application version: 0.07.2279 (beta)
19:01:12 . The action name is 'Identification'
19:01:12   Selected phone type: W595
19:01:12   Selected connection method: USB EROM
19:01:12 i Instructions
19:01:12 i 1. Make sure the phone battery is charged to at least 50%.
19:01:12 i 2. Switch off the phone!
19:01:12 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
19:01:12 i 4. Press and hold the button C, then connect the cable to the phone!
19:01:12 . The action started waiting for the user
19:04:34 . The action finished waiting for the user
19:04:34   Connecting via SEMC USB Flash Device (USB2)...
19:04:34   Device driver version: 2.2.0.5
19:04:34   Entering baseband CPU service mode...
19:04:34   Detected chipset: DB3150 'C900
19:04:35   Boot mode: EROM
19:04:35   IMEI: 35296503469334
19:04:35   OTP CID: 52
19:04:35   OTP area status: Locked
19:04:35   Product type: Retail
19:04:35   Effective color: Red
19:04:35   Sending loader...
19:04:36   Sending loader...
19:04:38   NAND flash chip ID: 002C-00A1
19:04:38   Phone type: W595
19:04:38   MAPP CXC article: R3DA032     prg12067082_CHINA_LD
19:04:38   MAPP CXC version: R3DA032
19:04:38   CDA article: CDA12345678/123
19:04:39   CDA version: R11A
19:04:39   Default article: 1206-7066
19:04:39   Default version: R3DA032
19:04:39   Language package: APAC-ANZ
19:04:39   The phone is not locked to a network.
19:04:39   Sending loader...
19:04:41   Starting file system...
19:04:45   Initializing GDFS access...
19:04:45   Turning off the phone...
19:04:46 i Please disconnect battery and cable from the phone!
19:04:46 s Successfully done.
19:04:46 . The action entered shutdown phase
19:04:46 . The action reported success

Additional details
---
4C E3 60 0C 93 0F 05 18 89 5C 67 04 15 6A ED A0 
1F 9A 51 51 13 5E D5 D6 39 E3 69 F4 C5 26 4B B7 
C1 86 D1 EC 63 1C 5B C8 17 8A A2 2D 74 D4 
---

Flashing log:

Action journal
17:25:50 Flash
17:25:50 Allows to change languages supported by the phone and upgrade its firmware.
17:25:50 Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 32-bit
17:25:50 Application version: 0.07.2279 (beta)
17:25:50 . The action name is 'Flash'
17:25:50 Selected phone type: W595
17:25:51 Selected connection method: USB EROM
17:25:51 i Instructions
17:25:51 i 1. Make sure the phone battery is charged to at least 50%.
17:25:51 i 2. Switch off the phone!
17:25:51 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
17:25:51 i 4. Press and hold the button C, then connect the cable to the phone!
17:25:51 . The action started waiting for the user
17:26:24 . The action finished waiting for the user
17:26:24 Connecting via SEMC USB Flash Device (USB2)...
17:26:24 Device driver version: 2.2.0.5
17:26:24 Entering baseband CPU service mode...
17:26:24 Detected chipset: DB3150 'C900
17:26:25 Boot mode: EROM
17:26:25 IMEI: 35296503469334
17:26:25 OTP CID: 52
17:26:25 OTP area status: Locked
17:26:25 Product type: Retail
17:26:25 Effective color: Red
17:26:25 Establishing connection to the server...
17:26:29 Receiving news...
17:26:32 i No news
17:26:33 Actual credit: 0.00
17:26:40 Sending loader...
17:26:42 Sending loader...
17:26:44 NAND flash chip ID: 002C-00A1
17:26:44 Sending loader...
17:26:47 Waiting for flash files to load...
17:26:49 Writing file W595c_12067082_China_R3DA032_Red52.a2sw...
17:26:58 Actual credit: 0.00
17:29:41 Final verification...
17:29:57 Writing file W595i_1206-7066_APAC_ANZ_R3DA032_Red52.a2fs...
17:32:13 Final verification...
17:32:15 e Failed!
17:32:15 . The action entered shutdown phase
17:32:15 . The action reported failure

Error code
# 862C8F7BE791DE3A

Error details
---
3E 6D 2C BF EA 6C 9E 15 68 F7 22 46 4C 5B 66 0C
90 58 38 F0 54 5D D2 EF 03 9E 2B B8 0A 26 0A 33
00 EF 71 D6 F9 32 42 4B 88 A5 D1 49 C2 DA 7A 63
F0 BF 76 A0 74 9D 4E 74 F8 3D 80 F8 84 6B EA 99
EF 56 4C 64 2A AC DE AB A8 B7 62 E9 8C 45 5A C3
D0 EF F8 02 6C 1D 6E 2B B8 68 0E 46 64 0B C2 EA
6E 6D 3A DF 5C C3 02 0B 38 E3 94 BD 1C 60
---

[senter]

You must use these files:

1. W595i_12055129_Generic_R3EG004_Red52.rar
2. W595i_1206-7066_APAC_ANZ_R3EG004_Red52.rar
3. W595c_China_1217-1876_R4A_Customized_China.zip

[imperius]

thnx 4 yr reply i cant seem to find W595i_1206-7066_APAC_ANZ_R3EG004_Red52.rar in the downloads?

[senter]

thnx 4 yr reply i cant seem to find W595i_1206-7066_APAC_ANZ_R3EG004_Red52.rar in the downloads?

In Omnius see here: Browse & Download -> Flashes_SONY_ERICSSON -> W595 -> R3EG004 -> LP -> W595i_1206-7066_APAC_ANZ_R3EG004_Red52.rar