Which program to use for t637 avr,arm firmware?

[wogeboy]

I want to debrand my T637. I see that here on topsony they have the files I need (I think) to flash and debrand.

Do I need to use a certain program to do this with?

thanks

[wisky_2004]

I want to debrand my T637. I see that here on topsony they have the files I need (I think) to flash and debrand.

Do I need to use a certain program to do this with?

thanks

do you have a cable for your phone??? specify what cable and give some phone info... cid/color db....

[wogeboy]

I have a Cruiser cable..I think these phones were cid 16.

It is unlocked...I just need to know which files to get to flash firmware and then unbrand....thanks !

[ivbuiliev]

Flashing both avr and arm files will debrand your phone. Another way is to flash only avr file but it must be with same revision as your original arm. For example: if your firmware is R7A011 you must flash R7A011 avr file. I hope this was helpfull.

[wogeboy]

ok...I will give it a shot..thanks for the info

[wogeboy]

I flashed with the newest AVR and ARM..it would stop at 99% for the arm and give me a error code.
I then checked the phone and it showed that the firmware was upgraded...weird.
So I did the avr flash and it also stopped at 99%...but when I checked the phone both updated firmwares were showing in the phone and the phone works properly....
not sure but all seems ok and it is also now unbranded....thanks.

P.S. anyone know what cable I need for the T637 if I ever want to use the SEUS program? (I dont think I can use a cruiser cable with it)

thanks again

[ivbuiliev]

I think it was something like DSS-25, but check the official SE there are infos.