K800i has died

[itisfalse]

Make this:





Follow the instructions!

Can't do that either get this error:

Action journal
22:51:47   Unlock network lock by reset
22:51:47   Unlocks the phone network lock by reset (up to OTP CID 53).
22:51:47   Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 32-bit
22:51:48   Application version: 0.07.2279 (beta)
22:51:48 . The action name is 'Unlock'
22:51:48   Selected phone type: K800
22:51:48   Selected connection method: USB ROM
22:51:48 i Instructions
22:51:48 i 1. Make sure the phone battery is charged to at least 50%.
22:51:48 i 2. Switch off the phone!
22:51:48 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:51:48 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
22:51:48 . The action started waiting for the user
22:52:24 . The action finished waiting for the user
22:52:24   Connecting via Generic EMP USB Flash Device (USB1)...
22:52:24   Device driver version: 2.2.0.5
22:52:24   Entering baseband CPU service mode...
22:52:24   Detected chipset: DB2020 '9900
22:52:24   Boot mode: ROM
22:52:24   Sending loader...
22:52:25   Flash chip manufacturer: Intel®
22:52:25   Flash chip ID: 897E
22:52:25   IMEI: 3590*********
22:52:25   OTP CID: 51
22:52:25   OTP area status: Locked
22:52:25   Product type: Retail
22:52:25   Effective CID: 49
22:52:25   Effective color: Brown
22:52:25   Restarting the phone...
22:52:27 i Instructions
22:52:27 i 1. Make sure the phone battery is charged to at least 50%.
22:52:27 i 2. Switch off the phone!
22:52:27 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:52:27 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
22:53:11   Connecting via Generic EMP USB Flash Device (USB1)...
22:53:11   Device driver version: 2.2.0.5
22:53:11   Entering baseband CPU service mode...
22:53:11   Detected chipset: DB2020 '9900
22:53:11   Boot mode: ROM
22:53:11   Sending loader...
22:53:14 e Failed!
22:53:14 . The action entered shutdown phase
22:53:14 . The action reported failure

Error code
# 509FA839F85EF036

Error details
---
67 C2 53 B3 2E BE 7A 9F 1C 7D 3E DD 08 12 C2 C7 
2F 83 A8 02 90 31 0A C5 1C F9 3E E9 B6 68 AE 67 
FC 1F 7C 3E 1F 75 C8 3E 04 13 5E DB 28 39 1E 69 
F4 3B 26 43 1E 3C 2A 2F EC 6D 12 A4 C8 17 72 39 
14 6C E4 21 C0 BF 46 AF DC B3 7E 8F 52 19 38 B2 
---

[senter]

Can't do that either get this error:

Do you read the instruction of the program?

Remove the phone battery and wait at least 5 seconds before reinserting it!
Press and hold buttons 2 and 5, then connect the cable to the phone!

[itisfalse]

Do you read the instruction of the program?

Remove the phone battery and wait at least 5 seconds before reinserting it!
Press and hold buttons 2 and 5, then connect the cable to the phone!

Yes I followed all the instructions it still gives that error.

[itisfalse]

OK I tried using it on XS++ & that did not do it either gave this error:

11:48:19| Baseband ID: 9900
11:48:19| Protocol Version: 3.1
11:48:19| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800)
11:48:19| ...using GDFS name
11:48:19| 
11:48:19| Profiling SEMC phone...
11:48:19| Platform: DB2020
11:48:19| OTP CID: 51
11:48:19| EROM CID: 49
11:48:19| EROM Color: Brown
11:48:19| IMEI: 35908801xxxxxx
11:48:19| Phone ID: K800
11:48:19| Region: EUROPE_1
11:48:19| CDA: CDA102568/10   R8A
11:48:19| Firmware Version: R8BF003
11:48:19| EROM: R3A022
11:48:19| Ready for operation!
11:48:23| +++ Sending CERTIFICATE LOADER...
11:48:23| 
11:48:23| Sending db2020_cid01_cert_p3g.bin...
11:48:23| Payload: Failed
11:48:23| 
11:48:23| Sending db2020_red49_cs_r3a009.bin...
11:48:23| Prologue: Failed
11:48:23| Error: Failed to send CSLoader!
11:48:23| FSX Shutdown!
11:48:25| Disconnected... Unplug the phone

[senter]

Yes I followed all the instructions it still gives that error.

Clean phone connector with wooden toothpick. For you may be is funny, but this method works fine.

[itisfalse]

it still does not work is there anyway to flash the CID 49 & make this phone turn on at least then, upgrade to 52 then Flash?

[senter]

it still does not work is there anyway to flash the CID 49 & make this phone turn on at least then, upgrade to 52 then Flash?

Try update via SEUS.

[itisfalse]

Try update via SEUS.

yeah I tried that, that was the first thing I did when I had this problem never helped.....even now, what do you think phone completely gone?

Edit sorry I thought you meant the PC suite, anyway I tried the update but "the phone is already up to date"