how to recover dead k310i

[dipan]

I tried to flash it with setool2lite_107. i dont know anything about it. i hv done just as written in website. uses th following files
W200_R4HA014_MAIN_GENERIC_ME_RED52.mbn
W200_R4HA014_FS_AMERICA_2_RED52.fbn
Melinda_Generic_CDA102737_107_R1A_GENERIC_AMERICA_ 2

after connecting to laptop with USB cable it shows 26.9mb memory. i forgot to do customization....then again tried ...now k310i is dead... i m posting the log file...




welcome to setool2 lite editon v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51flash descriptors
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUG
FLASH CID detected:49
Speed:921600
OTP LOCKED:1CID:49 PAF:1IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC98765
LDR:060718 0842 LIE_DB2010 _ FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'READY'

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUG
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
can't open file 'F:'Softwares'K310i\setool2lite_107\restR4HA014_CX C
CSloader version
SETOOL2 LITE COMPAG_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Can't get packet properbes.
wrong response, break.
failed, that is fatal
Elapsed:406 secs.




now nothing happends when i switch on...... now what to do?

[george26br]

if setools can identify your phone, and you want to flash it with w200 firmware. flash it again with w200 firmware or try to restore GDFS of your k310. when i crossflashed my k310 cid 49 i used w200 cid 49 firmware, not higher.

[dipan]

thanks for replying... but how to do it.. where can i get those files... if u tell me in details i will be thankful...

[george26br]

you can download those files from download section.
try using Cid 50 if you wont find for cid 49

[hyperion17]

You can flash K310 CID49 with W200 CID52 firmware. This time use SeTool 2Lite 1.11. If the GDFS it's not damaged, it should work.

[dipan]

thank u .....