What files do I need to flash the sony k750i?

[northleaf]

just got the uc-10 cruiser cable today...

now which is the best program for flashing the k750i? Also, how do I determine which set of files I need for my particular k750i? I'm in the U.S., so I need an english set..

Also, I can't connect my phone thru xs++ using the 'hold c' method...its not recognized...the phone is totally bricked and has been for a couple years.... so the battery is probably completely dead.. how will I even connect to ANY program?

[hyperion17]

You need a charged battery in order to identify your phone in Setool2Lite:
http://www.topsony.com/forum/upgrade...log-t8314.html

[northleaf]

ok i took the battery to an at&t store and they charged it for me.... but now I still can't do the steps u listed to identify my phone. The phone is bricked! What should I do first?

[hyperion17]

Try to connect with "2 + 5" instead "C".

[northleaf]

Try to connect with "2 + 5" instead "C".

that doesn't work....still no response whatsoever from the phone..

Which program is even capable of powering up my totally bricked phone?

EDIT: I used SEMC Tool 8.4 "recover certificate" in the flash ARM menu.. and it said it was successful, but I have no idea what this means or what I should do next to proceed with a full flash..

[northleaf]

Using setool2lite, I can use the 'identify' function AND the 'unlock/repair' function but the phone still won't power up at all. What else do I need to flash to make it alive again?

here's the reports:

after clicking 'identify'



after clicking 'unlock'repair'

[k_palles05]

mate go to settings and check complete phone after flash

and add this two file

Top Sony - All about Sony Ericsson mobile phones. Free Firmware Download - Unlock - Upgrade - Debrand

Top Sony - All about Sony Ericsson mobile phones. Free Firmware Download - Unlock - Upgrade - Debrand

and tick flash

[northleaf]

i don't see where to click 'finalize phone' or even where the settings menu is... but i got this error when trying to flash those 2 files you supplied me..

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:1 secs.

[k_palles05]

i think your gdfs file is corrupted and cannot flash to that free software you.,. only authorize technician will do that problem.,. i can do that but im here in phillipines i can do that because i have the tools and i have activated setool3

[northleaf]

aren't there free programs that can flash the gdfs?