Updated gone wrong

[hyperion17]

Unlock and downgrade to CID52 with OMNIUS, then reflash with CID52 firmware, using Setool2Lite or XS++3.1.

[itisfalse]

Yes sorry its done but phone wont still come on here is code for done:
I do not know how to downgrade

Action journal
22:06:59   Unlock network lock by reset
22:06:59   Unlocks the phone network lock by reset (up to OTP CID 53).
22:06:59   Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 32-bit
22:06:59   Application version: 0.04.2151 (beta)
22:06:59 . The action name is 'Unlock'
22:06:59   Selected phone type: K800
22:06:59   Selected connection method: USB ROM
22:06:59 i Instructions
22:06:59 i 1. Make sure the phone battery is charged to at least 50%.
22:06:59 i 2. Switch off the phone!
22:06:59 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:06:59 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
22:06:59 . The action started waiting for the user
22:07:17 . The action finished waiting for the user
22:07:17   Connecting via Generic EMP USB Flash Device (USB1)...
22:07:17   Device driver version: 2.2.0.5
22:07:17   Entering baseband CPU service mode...
22:07:17   Detected chipset: DB2020 '9900
22:07:17   Boot mode: ROM
22:07:17   Sending loader...
22:07:17   Flash chip manufacturer: Intel®
22:07:17   Flash chip ID: 897E
22:07:17   IMEI: 35908801644880
22:07:17   OTP CID: 51
22:07:17   OTP area status: Locked
22:07:18   Product type: Retail
22:07:18   Effective CID: 53
22:07:18   Effective color: Red
22:07:18   Restarting the phone...
22:07:20 i Instructions
22:07:20 i 1. Make sure the phone battery is charged to at least 50%.
22:07:20 i 2. Switch off the phone!
22:07:20 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:07:20 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
22:07:44   Connecting via Generic EMP USB Flash Device (USB1)...
22:07:44   Device driver version: 2.2.0.5
22:07:44   Entering baseband CPU service mode...
22:07:44   Detected chipset: DB2020 '9900
22:07:44   Boot mode: ROM
22:07:44   Sending loader...
22:07:44   Establishing connection to the server...
22:07:48   Receiving news...
22:07:50 i No news
22:07:50   Actual credit: 0.00
22:07:58   Actual credit: 0.00
22:07:59   Effective color: Brown
22:07:59   Effective CID: 49
22:07:59   Restarting the phone...
22:08:01 i Instructions
22:08:01 i 1. Make sure the phone battery is charged to at least 50%.
22:08:01 i 2. Switch off the phone!
22:08:01 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:08:01 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
22:08:32   Connecting via Generic EMP USB Flash Device (USB1)...
22:08:32   Device driver version: 2.2.0.5
22:08:32   Entering baseband CPU service mode...
22:08:32   Detected chipset: DB2020 '9900
22:08:32   Boot mode: ROM
22:08:32   Sending loader...
22:08:35   Code NCK for relock: 3609800152646015
22:08:35   Code NSCK for relock: 7259365912038351
22:08:35   Code SPCK for relock: 2075078455203598
22:08:35   Code CCK for relock: 9481006839935257
22:08:35   Code PCK for relock: 6391030892793745
22:08:35   Code ESLCK for relock: 4358109632651873
22:08:35   Code NCK for unlock: 8211176055579581
22:08:35   Code NSCK for unlock: 6397612426097917
22:08:35   Code SPCK for unlock: 9746204248508491
22:08:35   Code CCK for unlock: 8843521452141232
22:08:35   Code PCK for unlock: 0937233765193683
22:08:35   Code ESLCK for unlock: 7172361590031960
22:08:35   Writing flash...
22:08:37   Effective color: Red
22:08:37   Effective CID: 53
22:08:37   Turning off the phone...
22:08:39 i Please disconnect battery and cable from the phone!
22:08:39 s Successfully done.
22:08:39 . The action entered shutdown phase
22:08:39 . The action reported success

Additional details
---
36 21 65 A0 8F 67 C1 3C 2D 10 6B E8 87 5E D7 34 
FB 1A D3 3D D1 EA 6F DA 23 AF 65 08 29 32 F1 43 
1B DA 4D 80 81 74 61 1C 73 C6 2F 88 1F 85 
---

[senter]

Yes sorry its done but phone wont still come on here is code for done:
I do not know how to downgrade....

See here:

[frappuccino]

Hi, I have the same problem!! Thank you so much for this thread!!! I have downgrdaded in Omnius but have no idea how to flash MAIN and FS with CID52 and customize in XS++!!! any further help will be hugely appreciated!!! THANKS!!! :)